Search results for query: *

Thanks Rusty I'm about 500 miles from

I have to double check

I was trying to be sarcastic I guess neither joke worked very well Anyways I hope it's the secondaries not opening.but I doubt it

I don't know what rhetorical means Anyways how much more power did you feel after the secondaries were fixed

OK. How

I'm thinking if the throttle and secondaries are all working I'll start replacing the smaller fuel lines one section at a time till I get back to the gas tank. Maybe I'll see something else while I'm down there. I just don't understand why it's not popping like it's lean. Thanks all and Merry...

It goes thru a fuel line pressure regulator set between 4to6 pounds just before the carb. Thermoquads don't need much pressure

It was either add the pump or find the return line to the tank Maybe I'll try it without the mechanical fuel pump The electric is running all the time

It vapor locks sometimes so I just turn the key and fill the bowl

Lots of good ideas and you guys helped me a lot in the past. I did block the tank vents but changed it like the older ones from the fill tube down to the chassis. I put the electric fuel pump in for easier starting. Manual choke too Put in a fuel line pressure gage and it reads 4 to 6 at idle...

Thanks for the quick reply the purple shaft is hyd oval track with .495ish lift mech pump is Edelbrock filters both new inline just bowl work on the heads Kragen cheapest electric pump. I'm scared to bring a gas line under pressure inside to monitor

I'm running a 360 with a purple cam ported heads RPM intake thermoquad carb. It has a electric and mechanical fuel pump. I'm still running the 5/16 fuel line. When I floor it it pulls great till 3000 and won't rev much higher. Another time I was crusing about 2500 floored it and it pulled...

Thanks guys for the response I will try to simplify the hoses to make installation easier Makes my job simpler Jim

Is there anything I can do with the 4 extra vent.lines in gas tank Can I just connect them together or do they serve a purpose? This is in a 71 Swinger California car dart. Jim

Can you put smaller stem magnum valves in j heads if you change out the valve guides? Jim