Search results for query: *

have you asked the shop who is painting your car what they recommend? maybe even do it for you so the overall job comes out nice and not have an issue between the chemicals you are using and what they are using? If after an expensive paint job there is a issue with the chemicals used to seam...

Car is a little dirty, but here is my cap. Love the look of it,and most recognize it as a Chrysler thing, so very few nova quips.

The right side mirror that matches the left hand remote mirror is basically for the passenger to look out of. It does not let the driver look at anything behind. On mine I found a convex mirror that I double sided tape to the original and now can see out of it.

To be honest do not remember at this time. the car is 400 miles away at this time. I think that the unit is normal closed so wiper switch works normal, but either slow speed or the return wire is the one spliced in so when you turn on the delay switch is sends the power to the motor then turns...

Zoom WINDSHIELD WIPER TIMER MODULE Time interval (without modifications) is adjustable from 3 to 30 seconds for intermittent wiper function. Fully Assembled Module $10.00 SKU:MXA041 Buy 5 for $9.50 each and save 5% Buy 10 for $9.00 each and save 10% Buy 50 for $8.50 each and save 15%...

With a $10 module/relay hooked up to my Darts wiper motor have intermittent wipers with up to over a minute delay.QKits Electronics Quality Electronics Store Kingston Ontario Canada

Also "Dart67" reworks your stock springs.

I would also strip the paint around the wheel lip, very common rust area there also. Better to find it now, than after repairing lower quarter area, finding out would have been easier to just replace the whole quarter.

Not uncommon, was talking to a friend in the hanger I work at, who also restores cars and was saying that most cars today are over restored. Body panel fitment, welding, paint, etc. factory back in the day was not as good as you see on " correct " restorations today. That is why I like the...

Member "Dart67" does the modification to your stock hood springs.

MEK methyl ethyl ketone. more agressive than carb cleaner if that did not work for you, same precautions. you can get it at lowes/home depot or some paint/hardware stores.

I prefer mine on top :lol:

Herb, member "Dart67" can take your stock springs and modify them for a glass hood.

Have seen fenders with a large stack of shims between the bottom of the fender and its mounting location which lowers it and would not " bow out " as much

Yes, factory Dakota spoiler. Helped solve a temp problem at highway speeds. "Dart67" Has a wright up on the install on his Dart. It keeps the lower piece to funnel air into the lower part of the rad on the Dart like it does on the Dakota.

People seem to like the rather stock look, but are then surprised when I road race it. Drove it to No Problem Raceway in Louisiana about 5 years ago on their 1.8 mile road course for a test and tune. Only one that drove their car there. The rest had caged race cars, RX7, 240 ZX etc. When first...

225/60/15 in front and 235/60 15 in back. Needed to trim the forward part of front fender to accept that big of a tire. A larger tire will fit in the back, but since the car is set up for cornering, it is better to have the car sit as level as possible

not like you could mow the grass........

Mine is Turbine bronze base/clear. my friend painted it a and asked how MUCH orange peal I wanted. I wanted a little like a factory job would have. When fresh it came out like factory, one week later just a little less. So maybe yours may lay out a little. Shot in NH mid April, 65 degree...

Put a convex mirror over the original passenger mirror face, now can be seen from drivers side and the convex works good on the passenger side for blind spots

or make your own from a early Dakota's front air dam, It also helps cooling by funneling air to the lower part of the rad, sorry the picture is not the best

Heard it was basically the same door handle as a mid 70's to late 80's pickup door handle

Have been running textured paint instead of a vinyl roof for over ten years in the south. Still looks good and fools most of the people All the time.

:Have a built 360 with it badged as a 273, should see the looks on the other faces when they look at the 273 Dart that beat them, can not wait to put a 408 in it, with it still badged as a 273.:D:D:D

In the south only run recycle a/c, which means that no outside air is induced, only recirculates inside air. even when cruising and wanted to run with outside air and a/c do not see a problem because of low throttle needed for cruise. Added a throttle switch for over 3/4 throttle to cut the a/c...

No issues with the AC and the air cleaner. If you notice on the passenger side air cleaner tube, it rises up just a little then back down to clear the AC hoses. The tubes where hand rolled then welded on a old air cleaner I had sitting around. Then just some foam glued to the end tube plates...

That is where I got the idea from.

Sorry for the hijack. It is a Agusta 139, 12 pass with 2 P&W PT6c67c engines 1300 HP each or 1800 plus on one engine. first twin engine mid size helo with true single engine fly away. used in offshore oil and EMS/RESCUE. PM with contact, we will talk.

The air cleaner does the cleaning for me! Stored in garage when not driving, so very little accumulates, not more than usual, as not going down a lot of dirt roads, or sitting under pine tree's.

Yes, carb temps are lower, even in stop and go traffic. And at HI way speeds, the ram air also makes a difference, almost like a poor mans tunnel ram. Have not put a pressure gauge on it though. Since my daily driver and no choke, when temps fall bellow 40 degrees, I run an open air cleaner to...