Search results for query: *

These are the older big block tall valve covers with some decent chrome left on them. I would use them on a clean driver type car myself. They still shine nice. Little surface rust on the inside as shown in photo. 120.00 shipped within the states. Have PayPal.

I ordered them new is the best answer I got . I suppose I could probably compare a set of 1.5s I have but they are on an engine.

New set of crane ductile iron adjustable rockers for big block. 1.6 ratio. 320.00 shipped.

Ball joints are snug, no problems with these parts.

I should have mentioned if you prefer them to have the ball joints removed just let me know before they go in a box.

This is a pair of 73-76 upper control arms complete with cam bolts and useable ball joints. The rubber boots should be changed as the pickle fork did them in during removal. 135.00 shipped to the lower 48 states.

Two pair of Braswell custom metering blocks built from new Holley HP blanks. Photos show the quality of work peformed on these tuneable blocks . These have some age on them but have never been used. 150.00 shipped to the lower 48 states for both pair.

This cap doesn't appear to have ever been used. I have had this a very long time. Forgot I had it and found it in a box while looking for a different part. Unsure if repo or original. It is different than the recently purchased repos I have on my covers now. This cap pushes down on the stand...

11.750 caliper brackets and big ball joint upper control arms still available. 200.00 + shipping for both pairs of parts or 100.00 + shipping for choice of either pair.

Thanks for the info Karl. Bushing looks like it has plenty of life left in it and the mounting threads are great. Anyone thinking of doing a auto console floor shift conversion? I've been saving this bracket for decades just for you. Lol.

PM sent

The sealing surfaces are in good shape without any deep pitting or problems that would make them leak. The heat riser flap moves freely but is missing the spring. The flap should be removed if used in a A-body. Thanks for the input on figment guys.

I'll go take them now. Be posted in a moment.

These B-body HP manifolds have casting#s 2806900 Right 2843992 Left I understand they can be used as a lower cost alternative to headers for an A-body big block swap. That was my plan for them till I got some tti headers. I haven't gotten around to fitting them in a BB A- body to prove it can...

PM sent

PM sent

Make an offer

Spindles sold Still have caliper brackets and upper control arms.

These new spindles are correct for the 73 up big bolt disc conversion. These slider type caliper brackets use the 11 3/4" cordoba rotors which require a minimum 15" dia. wheel. The upper control arms are the correct used take offs to work with these spindles on a 67 up car. 350. for everything...

200.00 for the pair. Will not fit the 64-66 early a bodies.

Thanks Mike.

I don't know what transmission I took this off of but perhaps someone will recognize and be able to use it. 25.00 shipped to the lower 48 states, a bit more out of country.

This is an as built from the factory transmission from 1975. Dodge truck/chassis model as used under motorhomes. My best guess would be it is not. I don't really know what a lock up is or if they were even available back in 75? I don't believe I remember hearing the term lock up till later...

Picture of snapped off dipstick handle. If you noticed the hole drilled in the bell. It was how they came to shoot your timing light through with the engine cover removed. The ground line is TDC. Degrees marked on converter. Motorhomes & cabover trucks only thing I believe.

For sale 1975 big block 727 transmission. This is a good working trans with 34,457 original miles on it removed from a motorhome. I drove it on several trips without problems before pulling. Not the funky short tail with the emergency brake drum. It uses the standard slip in driveshaft. It...

New crane cam and federal lifters $175.00 shipped to the lower 48 states.

I'll take em

These hooker headers have some dings and wear to the thermal coating from use. Great performance headers for a drag or driver condition car. I didn't clean them up. They are as removed from a 70 charger. 2" tubes with 3 1/2" collectors. $150. or best offer. Buyer pays shipping.

Neutral balance for Chrysler big block and 2nd generation Hemi. Not sure about small block fit?

Used part $300.00 shipped in the lower states. A bit more elsewhere.