Search results for query: *

I havent fired it up just yet,but it really isnt too big of a cam.It has less duration at .050 lift than the mopar 509,and the intake lift is only .494,so i dont see any problems with clearnace issues.I did order edelbrock torker valv springs,so i wouldnt need the extra machine work.They are...

ok,ill prob order it in a week or so

cool! Ill have to order a copy.With only 322 cubes,i gotta get every ounce of power outta this thing.Thanks

Is there a book,website,or post somewere that goes through the whole process uf performance tuning for max performance somewere?Im not tlaking about swapping spark plugs and adjusting the idle mixture screws.Im talking about were the timing should be as a starting point.How to adjust mechanical...

without pulling the heads,id say your cam is small,i would upgrade to a lunati voodoo,slit pattern cam,will help wake it up some.Also,the cam is a bit small,id go with a 750 holley,vaccum secondary.Get it jetted right for your combo,and work with the secondary springs to get it dialed in.Other...

sure,it wont be a torquey as a 340-360 or stroker motor,but will be fun in a light car.You need 302 casting heads!Dont care what peeps say,i can speak from experience.Keep the valves size stock,get good valve job.If you cant find any near you,there are always some on here at good deals,like...

im sure you have tought of it,but sometimes its the easiest things we dont think of

want to sale the 72 grille?lol unlike most folks,i really like that grille better than the 70,71 grille,but they seem harder to find.Good luck with your project,and come in and join the chat sometime.See ya!

i see comp cams have a complete valve train kit,with cam,lifters,valve springs,retainers locks,and timing chain.For the money,i think its the way to go,because everything will match,so there shouldnt be any guess work.Thanks for all the advice though.

I looked in the summit website,and the lunaticam calls for a stronger spring than what i have now,so i dont know if ill use these springs or not http://store.summitracing.com/partdetail.asp?CP=1&part=DCC-3614542&N=700 0&Ntt=DCC~3614542 or CCA~20~232~4 or DCC~4120233 or DCC~5249847 or...

They are a dual valve spring http://store.summitracing.com/partdetail.asp?autofilter=1&part=DCC%2D3614542&N=700+400172+4294822607+115&autoview=sku i remeber they were expensive when i bought them back in 2001,but they have never been out of the box.I also have a mopar 509 cam i could put...

Ok,heres the deal,i have some new mopar performance valve springs,they were ordered with a 557 solid cam.I dont have the part number right here with me,but i was wondering if they will work with my competetion cams,280-480 cam.Its an old grind(i heard they changed the centerline in the 90s?)but...