Search results for query: *

Thank You All . I have 2 month old carter mechanical, 110 gph. pump,All New 3/8 aluminum hard lines, except at connections, new 3/8 fuel injection rated rubber hose. Do Have push connect 3/8 fittings at pump . The tank Only has one line ,the feed line, the vent on the filler neck would be my...

Yes it Is. My 680 Quick Fuel Carb is Supposed To Stay At 6 1/2 psi. But I Know volume is the big key as long a pressure stays above 5 psi. Thinking of going all 1/2 in. and #8 lines front to back.

My 68 dart with a mild 318 has a stock tank with a 1/2 in. line sending unit ,3/8 & number 6 fuel line tank to carb, running a carter, race mechanical pump, quick fuel 680 vac. sec. with guage on dual feed line. The Problem is ,when I fisrt start it in the morning it is unregulated at 9-9 1/2...

Here's my results!!!!My 68 dart,318,904,3.21 7 1/4. Just had the edelbrock carb rebuilt and installed. I checked the timing. Base was 5 deg. which gave me a full of 26 ??? I moved it up to full of 35 and base of 9. My vac. advance hoes was going to metered vac. switched it to ported/manifold...

AS per. the edelbrock rebuild kit, the pump rod is in the middle hole. The vac. adv. is at the passenger front. manifold vac.,my timing is with vac. plugged off , have not checked full advance. I have never run base timing on any of my small blocks higher than 9degs.??? I will deffinately check...

Ii have a off idle hesitation,warmed up.185 deg.Just rebuilt a edelbrock #1406/600 cfm. Replaced a very worn out holley 600. It's on my mild 318,stck bottom end,78,00 miles,performer intake,mopar elec.ignition,hughes 318 muscle cam,street carter mech. fuel pump,stock coil,msd wires,5 deg. base...

Thank you all, for your knowledge and your replies!!!! I will take all your advise and do all your tests. Will let you all know how it turns out. Thanks.

I have put my second fuel sending unit in my 68 dart,2 dr. sedan. Both have been from Van's Auto Parts. I thought it was a ground problem. I now have a ground at the hard line before the fuel pump,a ground going from the sender to the body, aground from the hard line to the body, the block is...