Search results for query: *

i took my wiper motor out it runs but wont take any resistens because i had a frozen pivot so something in their is stripped out so i think that's the problem thanks for some of the tips

yes i got a 74 manual looking at it now says nothing about thermal protection in there

what position id the motor to move anti clock wise becuase im also changing all the wiring on my car can the motor go in reverse if you get a wrong wire at the bulkhead

my wiper stopped working i found out the passengers side pivot was frozen so i found a good pair from a parts car on here both move freely i also have old bushings that broke so i replaced all of them the wiper only seem to work when the i don't have the actual wipers on the car when i put the...

i got the running lights working it was not getting power at the bulk head so i replaced the male and female connector thanks for the tips now i have to see if the drivers side running light will blink

the brake lights came back on i looked at the fuse when i took it out the top of the fuse came off still no parcking lights i'll trl to cut the splice i made and try my test light on the fuse i'll even order a new turn single switch for the hell of it

all the fuses look fine the only ground i see is the wire you have to bolt in i sanded it down still nothing the drivers side parking light was not blinking it started to smoke then it was fine for a few days but stopped blinking so i decided to splice in another parking light thats when the...

i got a 74 duster my parking lights and tail lights stop working any ideas

i need to replace my harness engine and underdash non ac slant six i got a really nice ac harness how do i make the heater non ac heater work with out hot wiering it could it be possible to swap the some of the wires?

i fixed it i had a bad regulator a few months ago got a high charge was forced to drive it home i neglected to check the top thick alternater wire that gose to the bulkhead witch i bypassed last year becuase that was shorting out the new wire i used to bypass the bulkhead part of the...

ok i;ll check those things out

Got a 225 74 duster once in a while the starter keeps ingaging when the engin is running i shut the car off and restart it and it stops back to normal i did all the typical repair to the harrnes like by bypassing a few wires from the bulk head everything is fine but it dose this one in a while...

been haveing a problem with my headlights thay only work on high beams not low i had some issues with the original harness so i replaced the engin and under dash harness with a good uncut non abused harness everything is fine but the headlights still only work on high beams so i replaced the...