Search results for query: *

I was hoping to just clean my trans case (904) and maybe clearcoat, but even after cleaners, wire brushing and steel wooling, it just was not looking very nice. So, I used Rustoleum aluminum primer and aluminum color coat, followed by clear satin engine enamel. The clear actually dulled it to...

Don't know which one you need, but Summit is selling Right Stuff. Maybe this will clarify... 1972 Dart Transmission & Vacuum

Doesn't glow in the dark , but I used red/orange model paint. Same for all the gauge pointers

That definitely sounds like it's in the speedometer. I'd recommend starting a new thread asking if it can be zeroed. Im sure someone on here will know. Once that is working you can verify if the speed is correct. If needed, gearing and tire sizes can be adjusted for by changing the little...

Does it zero and increase smoothly? Did it work right previously? Any changes made? Tires, rear...

Mine is a 75 with a 904, but should be the same. I Looked up 73 with a 340 (should be 727) on their website and it gives same part. Part Number: 6151659 Product Line: Balkamp IMPORTANT INFO: 68" Long Price: $ 19.39 /ea I tried to measure the knurled part on mine, looks like About 1-1/4 outside

Did you try it? I got mine from NAPA. Looked like what you picture ( old and new). I thought the same thing, but it fit.

I wanted to stay with raw aluminum, but could not clean it to my satisfaction. Tried Simple Green and Purple Power, pressure washed - still looked stained. Beading or wire brushing didn't look right either. I wish I would have tried some spray on wheel cleaner... Ended up I decided to paint...

Don't know if they ever did, but I doubt they would waste the time and paint on aluminum case. What about the pan color?

The 68 inch I used is #6151659. They also list a 63", but says 2piece 'lower' - and a 40" 'upper' ???. They show that 80" for 1970 and the other ones for 1971 up. I often find that parts listings are either not complete for different years ( or completely wrong) for '75 I frequently have to...

I just changed my cable this weekend. '75 Duster/ slant with 904, but I think it should be same. The one I took off was 63" and had a 1" hex nut, the one I put back on looked like the first one in pics above except no metal around the plastic. I got mine from Napa for $22. They call it a 68...

74 service manual shows 19pts standard and 16.5 high stall. That's only if you drained the converter and don't know what your pan adds...

Welcome to FABO. I am not aware of any 'giant chunks of iron' that can fall off... How bout a picture? What car was it on?

http://www.forabodiesonly.com/mopar/showpost.php?p=1969998385&postcount=34 This worked great to get everything out of the car. I did have a problem when I wanted to pick the engine to put on a stand. I was not able to straddle it to get a straight lift. May need to modify to get things back...