Search results for query: *

Bear in mind that "deals" are only "when" they are, and you can't get to choosy about "what." Yesterday a bunch of kitchen stuff was lying there at Habitat for humanity. Also bear in mind there is some scratch damage, they ain't perfect, and in the end, they are STILL GLUED...

Went out to Habitat for Humanity today, and picked up some stuff, the most of which was a bunch of Makita. 18V charger, 3 drills, one of which is dead, and two 1/4 hex impacts. So I decided to test them, clamped a 1/4 hex to 1/2 square driver adapter in the vise. Chucked up a drill and...

Doug Kalitta loses a front wheel.

Plumbing, not done,....... Got all the old galvanized pipe out, except I am leaving about 2ft coming in and out of the water tank. Easier to let that dog lie, and there were handy fittings right there. I still have to finish up hangers, and add two tees right inline with each other, in...

I don't need a "full wheelchair," more like a scooter. But most of those are junk on 3 tiny wheels, not suitable for rough "lawns." This is a huge heavy Permobil with a seating problem (I don't know yet what all it has, AKA lift, recline, tilt, etc, but an error prevents the chair...

Got enough crap cleaned out of the carport, I dragged the 67 home from the neighbors and shoved it back under there "to sit awhile," and drove the 74 Val back under there as well. Surprisingly, that thing did not need jumped, since LAST AUGUST, and cranked about THREE SECONDS before...

I had pulled a homeowner's electrical permit. I had not planned on rewiring the basement, as it was not fire damaged. I had an electrician I met via my neighbor "help" me with the rough in. I had called electrical for a "consultation" to see where I stood. So he comes over, turned out...

Posted elsewhere, I know nothing about this. I heard it was an option in the "Chev 2"

This is touted as the first vulnerability of it's kind that successfully targets both Windows and Linux It evidently enters and corrupts the motherboard BIOS https://www.google.com/search?client=firefox-b-1-lm&q=bootkitty

I have something like 5 Fluke meters, all sooty, smelly and variously damaged after the house fire. My FIRST Fluke I ever had I bought new back in the '90's when I went to work for the Motorola outfit. I don't remember, I think I paid over 300 bucks, a Fluke 73-III. The thing got wet...

First time I saw this I was about 5 years old, about 1953, on the old toilet out back of Gramp's house I dug it out when cleaning out the house and decided to decorate this junk trailer I'm camping out in

I am STILL totally pissed at the great big red print from down under. He ran Redfish off of here with an INCORRECT accusation, and I'm tired of stewing about it. I once had Red's contact info, email or phone, I have forgotten. If anyone can put me in touch DO NOT POST HERE...

Found it today back in the laundry room. Not pretty. I guess it could be made operable, but it will take A LOT

My best Fluke may not make it. It powers up with a new battery, but it was somewhat warm, and the battery leaked. The others I have in the basement are "smokey." So I thought I'd buy an inexpensive tester to get by until I get something better, or see about getting the Flukes cleaned...

Randy came down from Alberta for a few days, helped me and yesterday we made a BIG hole in the mess!!

That nice little mech drive tach, and somewhere near it was a cast iron Prestolite breakerless tach drive SB dist I bought from someone on here. Dist may be salvagable, IF I find it.

The other day I found my new camera, slightly smelly, in a DRY bag. Canon 5D Mk IV. AND the old Dakota often refuses to shift. Sometimes it defaults to limp mode (3rd gear) or locks up in 1st and refuses to shift out. Like yesterday, going to and from the dump, lol ANYWAY...

The AR club, that is. I have been thinking of building 1 or 2 from so called "80% lowers" But I figured since I have no experience with an AR, I should AT LEAST have one made by someone as a starting point so I know what is "right" shall we say. For some reason I got a ?? up my...

Peruvian cops us Santa --with a sledge hammer--as cover for a drug bust. And that DOES it!! That ENDS it!!! NOTHING is sacred!!

My adoptive neighbors informed me, the other day, that we are having Christmas breakfast. So I just got done ironing up a whole BUNCH of waffles for the somewhere around 12 of us, and am trying out a couple right now. sugar free "Mrs Buttersworth" syrup. I am for sure no...

https://www.dragzine.com/news/breaking-jose-gonzalez-resets-1-4-mile-pro-mod-world-record/ World Record E.T. Run - Mark Micke's turbocharged Pro Mod Camaro just went 5.35 at 272 mph to the quarter mile during a test session at K']Bradenton Motorsports Park! Driven by NHRA Pro Mod driver, Jose...

All righty, then..............back when I could actually work, all/ any of my rechargeable tools were the old Makita 9.6 "long handled" stuff, and a couple drills were the long handled 12V had the bulge at the bottom. But you cannot really buy batteries for them (nicad) anymore Weeks...

My neighbor today............ Handed me a little nitrous kit he's never used for a 2 stroke snowmobile.......... Looks like this except with bottle bracket and aluminum cylinder.

.............No idea who is operating the camera........

I have an old recliner which is basically "where I live" when sat down in the house. I guess about year and a half ago I damaged the foot gear such that it's a struggle to get the thing folded back in. I got tired of messin with that so today I dumped it upside down and looked it all...

I still think, LOL, that the irony of Jap engines in a B-29 is huge..............

Yeh, right. You know me. "Mr. piston stop." We can use a screwdriver, instead. NOT!!

Born in 47, a year older than I https://www.youtube.com/channel/UC22V3hRwVnPIT90xepSN8tA