Search results for query: *

Hey guys this pertains to my 72 Scamp. 84,*** original miles. Internally untouched since new. Car spends most of its time sitting in the garage. Suddenly it has developed a dead miss on cylinders 5 and 7. Plugs are wet and plugs are good. Have swapped in a second set of plugs, wires, cap...

Ok so with the 318 dilemma .. I've gotten to thinking about putting this 360 magnum I have out of a 95 ram into the dart. What will I need? Will all the accessories and serpentine belt system fit in the car just the way it is on the front of the truck engine? I would be nice to use the more...

So after my bent pushrod, bent valve experience- the machine shop says that the old gas had caused the valves to stick.. bad enough that the pushrods folded when the piston hit the valves... Long story short the mahcine shop (napa) says 350-500 to redo the valves, seals, and that if I want to...

So.... My 70 dart has 63000 original miles been sitting for a presumed 5-6 years previous owner says "yea it runs great, its just been sitting" so after 2 nights of frustration and checking.... still it wont run... OK- something is definately wrong I checked everything and Im not this...

Hey guys, Im trying to get the car started and its been sitting. I splashed a little gas in the carb, threw in a fresh battery and hit the key to see if it would at least run or fire for a couple secs on the gas. No GO! It seems to me like the started is not turning the engine over fast...

In layman's terms can someone explain to me the difference between the comp cams extreme energy 262 vs the 268? In terms of power band, idle, performance, etc.... (I have been recommended both by experts, but cant decide) Subject in question is 70 318 that will have a performer intake, 600...

Ok so if you saw my post in the new member forum.... I just picked up an all original 63000 mile 70 swinger with a 318 in it. My 72 scamp when restored was put back all original with its 318 2bbl (stock rebuild with fresh gaskets and paint), but I would like to do something a little different...