Search results for query: *

I have a pair of these heads complete, they have been cleaned and checked and are crack free... just wondering if they are worth rebuilding. I am on a tight budget so i will most likely be stuck with a stock type cast iron head, they will be going on a fresh 0.030 360 with kb107's

Are there normally plugs installed in the lifter oil passages at the front of block, or are they sealed by the cam thrust plate?

Do i have the wrong bearings? 76 360 block bearing p# 4999m 10 under main bearings crank was ground 0.010 Crank binds on the thrust surface when set into the block, is the thrust surface supposed to be 0.010 under as well as the rod and main journals? This the first chrysler i have attempted to...

How much should i expect to pay for a set of used factory adjustable rockers? there is a set for sale on craigs list locally for $80.00 just the rockers no shafts etc.. Will they work on my non adj. rocker shafts do i need any other parts to use them?

76' 360 stock crank and rods, fresh from the machine shop. I removed the original rope seal when i tore this thing down, just wondering what you guys prefer, I had planned on a new rubber seal (fel pro) but i thought i should get some opinions. The crank is grooved at the sealing surface for the...

Just picked up a 360, complete carb to oil pan. Casting # 4045601-360 dated 8-11-76. Did some teardow to see what i had to work with, as expected it could use an overbore (currently std dished pistons) as it has a ridge at the top of the bore. Took some crude measurements of deck hieght (feeler...

Will the late model 302 casting heads fit with the 273 exhaust manifolds in my 66 cuda? I thought i read somewhere that there was a casting on the head that interferes with manifold.