Search results for query: *

  1. L

    4 speed conversion - what went wrong?

    Hey All, Tried to start the car for the first time today after converting over to the 4-speed. I thought all I needed to do was ground the wire that went to the neutral safety switch on the old auto. Here's what's happening. 1. Without the neutral safety wire grounded, I turn the key and...
  2. L

    Clutch adjustment?

    Hey Everyone, Finishing up my 4-speed conversion, and got the clutch installed, trans in, shifter in and adjusted (shifts fantastically!), and am working on the clutch adjustment. I appear to be having a problem with the clutch adjustment, and am not sure what could be wrong. When I first...
  3. L

    Pedal to Z-bar?

    Hi All, I'm pretty close to finishing up the 4-speed swap........I got the zbar in and the bracket welded in place and all seems pretty cool. then I went to put the linkage from the pedal to the zbar on, and I can't figure it out. No matter which way I put it on, it really doesn't fit. Either it...
  4. L

    Over center spring

    I'm in the midst of the 4 speed swap, and was swapping out the pedal assembly. As I was doing this, I discovered the brake pedal on the 4 speed setup was sticky, so I took the assembly apart to free up the brake pedal. When putting it all back together, I had the most irritating time putting the...
  5. L

    Drive shaft for the big auto to 4 speed swap?

    Hey All, I've started the swap from my 904 to the 833, and had a question about the drive shaft. I don't know anything about the length needed yet, but wanted to know if the one i used with the 904 will be too short to start with, or will it be long enough to make work (cut if necessary)...
Back
Top