Search results for query: *

I'm reassembling my '66 Dart wagon after paint, I installed the grille and my newly acquired (used) headlight bezels when I ran into an issue on the driver's side fender- the bucket screws right in to the fender's factory holes, but the headlight is about a half inch off towards the side of the...

On the '66-'67 273 Charger/Commando motors with CAP, did the factory have the breather nipple on the air cleaner point to the front, or rear? Photos I've come up with generally have them forward at approximately the 4 or 5 0'clock position, although I've come across a few that seem to have it...

Looking for a solid answer on fit of this style B/C body exhaust manifold in an early A (driver's side): I keep seeing them referenced in discussions, but early A threads keep getting polluted with later A info that does not apply, and I have never actually seen any of these in use. The first...

I'm looking at replacing the tired leaf springs on my '66 Dart wagon, but I'm a little undecided on the best route to take. I'm leaning towards the XHD springs (ESPO), but I'm not sure if I should go with the +1s or not. I'd like a slight bit of rake, but nothing drastic (not the '70s look on...

Has anybody found an under dash evaporator unit that fits early As decently, and minimizes the "knee knockin'" issue? I've test fitted several different units, both aftermarket and Mopar dealer-installed ones in my '66 Dart wagon and have yet to find one that I'm reasonably happy with...

Does anyone know if this little plastic piece on the folding rear seat catch is being repopped? I figure my best chance is if it is similar to Barracuda pieces, but can't confirm... Haven't been able to find anything in the usual places (typical for wagon parts...) but I could be missing...

I'm trying to piece together some of the little odds & ends on my '66 Dart wagon project, and I'm trying to find info on the bumper jack. From what I've been able to find (and we all know the internet is always right...) the jack assembly itself and the baseplate are standard issue A body...