Search results for query: *

I have a pair of driver quality arm rests from a 74 Duster. No tears or cracking. They do have some sun fading on the top sides. $55.00 shipped for the pair in US. PM me if interested.

I have a right hand interior door handle for 73-76 A bodies. It's in nice condition and PN is 42082 $25.00 shipped in US. PM me if interested.

I have a nice OEM handle with no cracks and retaining pin from a 74 Duster. $25.00 shipped in US. PM me if interested.

I have an under-dash A/C vent assembly from a 74 Duster. All vents open and close properly. I will post the A/C heater plenum later, as I haven't removed it from the car yet. This should be the same for other years of A bodies. $25.00 plus shipping from El Dorado Hills, Ca. PM me if interested.

I have a right side kick panel from a 74 Duster. It's in good condition and is $20.00 plus the ride. PM me if interested.

I have a lower left side, seat belt cover for Dusters with the shoulder belt anchor in the roof. $10.00 plus shipping. It's just a hair too big for a flat rate box, so I would ship in a small box. PM me if interested.

I have a plastic glove box insert from a 74 Duster in good condition. This is plastic, not cardboard. It should fit a lot of different A bodies from 67 up. $20.00 plus shipping. PM me if interested.

I found a right side plastic molding for a 73-76 Duster. It has one small crack, when refinished would be hardly noticeable. I have the left side molding in a separate ad. $40.00 plus shipping from El Dorado Hills, Ca. PM me if interested.

I have a driver door upper plastic trim panel from a 74 Duster. It has been painted before, and I got some of old paint removed with air blower. Didn't want to use any type of solvent on it to soften plastic. One could spend more time on it, to try to remove more of old finish. Overall it's in...

I have a complete set of interior panels from a 76 Valiant Brougham hardtop. Yes, they are Burgandy, but color can be changed with Sem or similar products. $300.00 for the set plus shipping from El Dorado Hills, Ca. PM me if interested.

I have a right side interior door handle for 73-76 Dart hardtops. These maybe the same for 73-76 Dusters and Dart Sports. P.N. 42082 I think these are different for sedans. $40.00 shipped in US in small flat rate box. PM me if interested.

I have a pair of the lower shoulder belt anchor covers from a 76 Valiant Brougham hardtop. These are for hardtops with the shoulder belts which are attached to the roof. I don't know if these are the same for Dusters or Dart Sports. $10.00 each plus shipping from El Dorado Hills, Ca. PN's 3763...

I have a pair of door handle cups for 73-76 A bodies, $15.00 each. Also, a pair of lower seat belt covers for cars with the shoulder belts attached to roof. $10.00 each, shipping additional from El Dorado hills, Ca. Parts are from a 76 Valiant Brougham hardtop. SEM or other products work great...

I have an instrument cluster and a heater control/radio bezel for a 66 Dart. I don't know if the gauges work and the parts would need restoration to be real nice. I believe these parts are 66 Dart only. $60.00 for the parts plus the ride from El Dorado Hills, Ca. PM me if interested.

I have a trunk finish panel from a 76 Valiant Brougham. This goes on the inside of the rear body panel and covers the tail lights. To my knowledge this piece was only available on 74-76 Valiant broughams and Dart SE's. It is in nice condition with nothing broken. $50.00 plus shipping from El...

I have an under dash wiring harness from a 65 Dart GT. $65.00 shipped in US, USPS priority mail, from El Dorado Hills, Ca. PM me if interested in this harness.

I have a mounting bracket for a steering column tachometer. $24.00 shipped in US in small flat rate box. PM me if interested.

I have a pair of stainless trim strips that go toward the bottom of the 1/4 panel interior trim panel. These are held in place by bending over 3 tangs to attach them to the trim panels. Trim panels were junk and there were no door cards in the car. $28.00 shipped in US. I polished these and...

I have a pair of stainless trim pieces that go on the interior trim panel toward the bottom on a 67 Satellite hardtop. These are attached by 3 tangs that are bent over to hold them in place on the trim panel. $28.00 for the pair shipped in a small flat rate box. I'm posting them here, because...

I have a day/night rear view mirror from a 66 Dart. Day/night functions and it has good reflective surface. The base is pitted. Overall a decent driver quality mirror. $25.00 plus shipping from El Dorado Hills, Ca. PM me if interested.

I have a set of 4, rear seat belt anchors from a 66 Dart. $20.00 shipped in US in a small flat rate box from El Dorado Hills, Ca. PM me if interested.

I have a set of full length console mounting brackets from a 66 Dart GT. I don't know if these are the same for later years. The rear bracket would need new cage nuts. $45.00 plus shipping from El Dorado Hills, Ca. PM me if interested.

I have a pair of the metal trim pieces that go along roof, $15.00 each. A pair of rear 1/4 panel moldings, $10.00 each and left and right rear glass trim, $15.00 each. The shipping for the roof trim and the back glass pieces could be pricey because of their odd shapes. PM me if interested in...

I have an automatic shifter and linkage for a full length console from a 66 Dart GT. I also have the mounting brackets for the console. The console has been sold. $200.00 plus shipping for all parts pictured from El Dorado Hills, Ca. PM me if interested in these parts.

I have a pair of defroster vents for 63-66 A bodies. They are in good condition with nothing broken and they are not chalky. $30.00 for the pair plus the ride from El Dorado Hills, Ca. PM me if interested.

I have a A/C plenum and under dash harness from a 66 Dart. This was originally an air conditioned car with a slant six. There is no compressor or hard lines, as some- one put a V-8 in car. The harness maybe one year only in the sense that plug for the cluster has a row of horizontal pins...

I have a pair of the lower trim pieces for the 1/4 panel interior trim panels. These are the ones that have the tangs that bend over to hold them in place. They are from a 66 GT, but I think they were used on 63-66 GT's and maybe 270 models too. The front ones were scrapped because PO had put...

I have a pair of tan arm rest bases for 68-72 Darts. These may fit other models as well. They are in good condition. Mounting stud is broken on one of them. $10.00 each plus the ride from El Dorado Hills, Ca. PM me if interested.

I have a console from 66 Dart. I believe the top pieces are 66 Dart only. The plastic console itself should be the same for 66-76. There is some pitting in the pot metal pieces. $150.00 plus shipping from El Dorado Hills, Ca. PM me if interested.

I have a full length console from a 66 Dart GT. I believe the console itself is the same from 66 to 76 except for the face plates. The plastic body is in nice shape. I believe the face plates are 66 only. They have some pitting. The top surfaces could be sanded and refinished which would...