Search results for query: *

  1. Syleng1

    Going back to the basics- here is why:

    So the 66’ progressively is getting worse when I step on the gas. Breaking up and hesitating and just running like dog snot. Checked timing, thru in new plugs (old ones looked great.) Ohmed out the wires, checked the cap, and nothing to write home about. Then, at 4am this morning I thought about...
  2. Syleng1

    Decal question on ECU

    Picture below is of a ECU decal I recently bought on line and 2 ecu I purchased from #halifaxhops. On my 72’ 340 Demon which side does the decal go? On the face side where the plug is on the left or the side the plug is on the right. My memory says the plug on the left. Decal is facing the...
  3. Syleng1

    Seriously another alternator question.

    1966 Barracuda S 273-4bbl auto car All harnesses were replaced during 3 year rest. Previous VR / Alt combo was 72 and newer style cobbled together by previous owner. Now the car is all Factory style no mods. Quality harness manufacture was used. All grounds verified and checked. Battery to...
  4. Syleng1

    Just got off phone with M&H Electrical Fabricators 1972 Demon

    So I am getting ready to do a restoration on an early 1972 Demon 340 4-speed in my shop and calling about harnesses seen on Yearone. They are made by a company I've used before called M&H Electrical Fabricators. www.wiringharness.com I've had good luck with their product. Nice connectors...
  5. Syleng1

    Gauges go to full tilt!?!

    1966 Barracuda. All new harness, gauges reworked, new circuit boards- factory voltage regulator for dash. So I’ve put 362 flawless miles after the total rebuild and decided to take the car out and make it a even 400 before the weekend is over. I start the car and all my gauges go to full tilt. I...
  6. Syleng1

    Looking for a new socket for ashtray lamp

    Looking for a replacement lamp socket for this center console wiring harness. This is the bulb that lights up the shifter indicator on 66-76 a body center console. The hole is .625” and mine works but will not stay in the hole with out sealer or a clip. Anyone know where to get a new pigtail...
  7. Syleng1

    Switch question for rear defroster

    Does any one know if there is an electric factory switch like this but just on and off? This one is on, on, off. 3 terminals- hot, load 1 and load 2. If yes- what’s the application? Need it for a rear defroster for a 66’ Barracuda project.
  8. Syleng1

    Electronic Transistorized Alternator voltage Regulator test

    Good afternoon All, Yesterday I was driving the Demon and the headlights and dash lights went into "blinking" mode and then went dim. Knowing I was one of two things, I went on line to find info on the wiring harness schematic so I could chase down my issue. Now my 1972 Demon has the...
Back
Top