Search results for query: *

I have these 1 7/8" small block headers. I believe they are hookers. They are coated with pan evac pods in collectors. The have some dings and such for clearancing as most A's require that with 1 7/8" hookers. , $650 + shipping from Indio,CA PM or Email to robule1 at Yahoo.com

67-72 style transmission cross member with mount. The mount is old and looks OK. Could probably use it, up to the buyer. Comes as pictured with the trans mount. $40 + shipping from Indio, CA My guess is it will fit in a USPS game board box, so shipping would be in the $20-22 range for US...

This is off a 73-76, will work on an 67-72 car as well. It's a better designed piece than the 67-72 units. Comes as pictured with the trans mount. $50 + shipping from Indio, CA My guess is it will fit in a USPS game board box, so shipping would be in the $20-22 range max for US...

This is I believe a 30930 pan, windage tray and pickup. The pickup OD where it screws in is approx 3/4" The pan rails are in good shape and the items need a good cleaning before use. I'm not running any BB stuff so on to someone else. I think new this stuff is about 385 or so. Asking 220...

10.5" small block bellhousing cast #3515734 Fits 1972-4 A-body and 1970-4 E-body (except 1970 with reverse lockout linkage) 318/340 3 & 4-speed applications, 4.354" bearing retainer opening, uses 130 tooth flywheel. Will also fit 1967-1971 A-body if the correct ballstud bracket is used Good...

New never used TCS products TF727 Billet Aluminum Direct Drum & Piston The drum is made from 7075 T6 billet aluminum Kit includes a new steel pressure plate. teflon sealing rings and, a TCS billet aluminum piston Safer than O.E.M. cast iron drum 57% LIGHTER than the O.E.M. drum - 3-1/4 lbs...

80254 B&M Supercooler 13000GVW Has the original attaching hardware in the bag. $30 + shipping from Indio, CA PM or email to robule1 at Yahoo.com Thanks

Looky what I found.... I have these 1 7/8" small block headers. I think they fit an A body as I wouldn't buy anything for a B or E car. I believe they are hookers. They are coated with pan evac pods in collectors. The have some dings and such for clearancing as most A's require that...

70-71 340 Air Cleaner 400 + shipping PM or email to robule1 at yahoo dot com

BB Crane 1.5 rockers with shafts, spring/spacers and aluminum hold downs. Good shape. One rocker has some small damage near tip. Didn't effect it on 700+ lift camshaft duty. $375 plus shipping from indio, CA PM or email to robule1 at yahoo dot com Happy new year!!!!

I have a pair of exhaust manifolds for a SB. Numbers are 2780945 and 2465769 One list says 67-68 A body cars 273-318. Probably would fit just about any 67+ A body. $50 + shipping from Indio, CA PM or email to robule1 at yahoo dot com

73 Duster hood latch assembly and top plate. Nice piece off a clean California car. $50 + shipping from Indio, CA My guess is it will fit in a USPS game board box, so shipping would be in the $20-22 range max for US locations. PM or email to robule1 at yahoo dot com

67-72 style transmission cross member with mount. The mount is old and looks OK. Could probably use it, up to the buyer. Comes as pictured with the trans mount. $40 + shipping from Indio, CA My guess is it will fit in a USPS game board box, so shipping would be in the $20-22 range for US...

This is off a 73-76, will work on an 67-72 car as well. It's a better designed piece than the 67-72 units. Comes as pictured with the trans mount. $50 + shipping from Indio, CA My guess is it will fit in a USPS game board box, so shipping would be in the $20-22 range max for US locations...

70-71 340 Air Cleaner 400 + shipping PM or email to robule1 at yahoo dot com

Pair of 340HP exhaust manifolds. Came off either a 70 Duster of Swinger 340 IIRC. Heat riser weight moves freely. No cracks or fractures that I can see. Need typical clean up prior to use. $550 + shipping Paypal or USPS Money Orders only as payment. Cash is OK if picking it up in person...

...

A new set of headers, never bolt up. They are 75160 Hedman Husler race headers for a BB a body 67-76. They are coated and come with the gaskets and bolts. The tubes are 2" with a 3.5" collector. These are much better headers than the popular Hooker models. Same headers at jegs are $1250...

Mopar SB M1 Single plane. This is the older model with the squared up thermostat housing. $175 + shipping from Indio, CA If it fits in a USPS flat rate game board box, in the 20-25 shipping range in the US. PM or email to robule1 at yahoo dot com

MSD advance bushings for pro billet style distributors. The bushing in an MSD system are limited to 18 degrees. The MSD supplied bushing sometimes don't allow for initial timing the engine wants without pushing your total number out of bounds. These solve that issue by allowing 4 or 8...

Custom length battery cable built too your length specifications. I currently have material to build cables using 1/0 EPDM welding cable or 2/0 battery cable. Cables are built with the same detail as my relay kits and are solid pieces. If moving a battery to the trunk, using smaller gauge...

Comp 305H cam and lifters. Bought a while back, sat on shelf, time to go... 305 dur 253 at .050 525 lift Ran this cam before in mid 11's cars and better. Plenty of chop at idle. Good bracket camshaft. $175 + shipping from Indio, CA It should fit in a USPS flat rate game board box, in the...

Mopar SB M1 Single plane. This is the older model with the squared up thermostat housing. Good shape. $175 + shipping from Indio, CA It should fit in a USPS flat rate game board box, in the 20-25 shipping range in the US. PM or email to robule1 at yahoo dot com

Indy 400-3 4500 MW Port Intake manifold and valley plate. Intake is drilled for fuel injectors or nitrous nozzles. Great shape. $375 + shipping from Indio, CA It might fit in a USPS flat rate game board box. If it does, then 20-25 shipping range in the US. PM or email to robule1 at yahoo...

Mopar M1 Intake for an RB engine. Great shape. $175 + shipping from Indio, CA PM or email to robule1 at yahoo dot com

Charge system bulkhead wire around. The idea is to remove the bulkhead connectors and resistance in the circuit from the charging wires. I have two set ups available. One is 6ga wire, the other is an 8ga wire with a 12ga fusible link. The 8ga wiring solution would be OK for alternators up to...

MSD advance limiter bushings in both 10 and 14 degree versions. They are CNC cut at an aerospace machine shop. The have the sides flatted on the sides of the 10* bushing to help fit in the advance window, unlike other bushings out there. If you want to get more initial advance then the ones...

Casting numbers 2780945 2465769 Nice pair of manifolds. 50obo + shipping from Indio, CA PM or email robule1 at yahoo dot com

Hooker 5115 super comp headers for SB B/E body cars. Used with some dinged up lower tubes like most hooker headers seem to have. $140 + shipping from Indio, CA Shipping is probably best via greyhound. I can likely send these for about $30-40 anywhere in the ConUS. PM or email to robule1...

Charge system bulkhead wire around. The idea is to remove the bulkhead connectors and resistance in the circuit from the charging wires. I have two set ups available. One is 6ga wire, the other is an 8ga wire with a 12ga fusible link. The 8ga wiring solution would be OK for alternators up to...