Search results for query: *

In need of about 24-30 inches of the front half of a clean A-body right side (passenger) rocker for a '69 Cuda project I'm working on. Needs to be pretty clean original or left over AMD section. No rotted or smashed stuff please. Could also use the dual exhaust notches from the rear valance of...

Searching for a couple Mopar Performance M1 LA small block dual plane intake part #p4532059. Looking for two of them. Any condition as long as the head surfaces havent been milled. Will consider other variations of the small block M1 dual plane. Thanks!

Searching for a Strange Engineering aluminum 8.75 35 spline spool. Part # D1566. Only interested in the spool itself. Good used is fine. Thanks, Charles

Looking for an RB M1 dual plane intake manifold part # P4532063 / P4529118 to finish buttoning up my '70 SFGTs 440. Nothing damaged please. Thanks, Charles

Looking for one of the Mopar Performance P4876445 aluminum center section. Bare housing or ideally with 3.91s-4.30s gears and 35 spline spool. Thanks!

Looking for late A-body 340 ('71-'73) exhaust manifold cores to port. Date codes not important, just the correct casting numbers: #3418623 (passenger) #3614368 (driver) Cheaper the better. Can meet up within 2hrs of lower NY/NJ/PA/CT area or meet at Carlisle in July.

Looking for good stock '70-'72 915 J-head cores to play around with and modify. 1.88s (preferred) or 2.02 valves is fine. Closer to the NY/NJ/PA/CT area the better (within 3-4hrs of NYC), but can also meet up at Carlisle this summer. Thanks, Charles

Building my '72 Demon 340 to run in the FAST series racing. Looking for the following parts: Carb: Thermoquad #6139S {Automatic Transmission} Intake: #3614025 Exhaust: #3418623 (passenger) #3614368 (driver) Thank you, Charles

Looking for a complete set of the old DC/MP porting templates for big block iron heads. Going to be cleaning up the original 906 heads to my SFGT. I know the PDF file is out there but I'd prefer to have the original. Thanks, Charles

Looking to buy a clutch kit for the 9 1/2" flywheel used in early A-body cars for a 273. I think its the same clutch for a /6. It can't be a used one and needs to include clutch, pressure plate, throwout bearing, and alinement tool. Just want to get our Barracuda drivable as the clutch slips a...

Don't Need Anymore.

I'm in need of a passenger side quarter for my 2 door sedan '67 Valiant. It needs to be a full quarter from a '67-'69 2 door post Valiant. Strait (minor little door dings o.k.) & no rot (light surface rust may be o.k.) please. Let me know what you have and please post a picture of what you have...

Need A full floor pan for my Valiant. '67-'69 Valiants & Barracudas ('Cudas), '70-'74 Duster, Demon, Dart Sport will work. Dart & Scamp pans won't work because the back is different. Cheaper the better:cheers:

Want rust free full floor pan for my 67 Valiant. There is a difference between the dart & valiant/cuda pans.Must be in the north east, lower N.Y., C.T., N.J., P.A. area. Cheaper the better:-D.

I'm looking for a passenger side quarter panel for my 1967 Plymouth Valiant two door post. Any quarter from a 1967-1969 Valiant two door post will work. There could be some rust and/or dings. No major rot or dents. Let me know what you have. I live about an hour north of N.Y. City. I don't want...

I 'm in need of a passenger side door and quarter panal in good shape ( little or no rust, strait not beat to death, minor dings maybe) and also floor pans (not rusted). Send a picture of what you got. I'm going to the Carslie show so I could meet you there too.