Search results for query: *

I am almost 100% sure i am right on this, however with a 2 bolt master cylinder, is the rear chamber for the front brakes? I know it is on the cast iron disc brake masters, but then again its easier to see inside the reservoir on one of them. Thanks Matt

Need to know what the tube diameter is for a mid 70s A body disc/drum setup. Plan on plumbing and double flaring it myself. I am using a cordoba disc setup front and cordoba drum setup in the rear, a dippy master cylinder, and a GM proportioning valve. Thanks Matt

I have a 1984 M body brake setup for my sons car that i am collecting the parts up to rebuild. Heres the question. I am rebuilding the calipers. Or at least getting the parts together to do this. Calipers currently have soft dust boots are installed. Do i have to use soft dust boots when i...

I have access to a pair of cordoba big brake rotors, and caliper mounts. Will the cordoba rotors, and caliper mounts fit the dippy spindles? Also will the dippy M body calipers work on this setup. Or should i get the cordoba calipers too. I think the dippy calipers are a 2.75" bore like the...

I have a disc drum setup for my 67 barracuda that consists of 10" X 2.50" bbp drums on the back, and 11.75" rotors with 2.75" piston calipers on the front. (Stock 79 cordoba setup) I purchased a couple 85 diplomat master cylinders. The bore size is 1-1/32" bore, i'd like to run one of these as...

I have a disc brake question but need to lay out what i have, and what i am concidering. I have the disc / drum setup off a 79 cordoba. This has the 11.75" rotors and 2.75" calipers, and 10x2.5" finned drums in the back. I have a 74 dart power booster, and would need the 79 cordoba master...

Hi Y'all, I am installing a 74 dart power brake setup on my 67 barracuda. I noticed a dimple in the inner fender that would need to be drilled for the upper support bracket, the other longer bracket that supports it from underneath seems like it will interfere with my clutch pushrod. Is...

Hi y'all, I posted this here, because i am hoping it will get the most traffic. I'm pretty savvy when it comes to finding stuff on the internet, however i hit a brick wall with this one. I would like to restore the factory brake booster that goes on ny 67 barracuda. Mine wasnt originally power...

I am looking to do a teardown and overhaul of my 74 dart brake power booster. Anybody hear know of a place that make kits to rebuild these ? Thanks Matt

i have most of the parts for a disc brake setup for another project car i just got minus spindles. my question is will a set of FMJ spindles which are more readily available fit and work with the 73 up disc brake calipers, rotors, caliper brackets, dust shields, and upper and lower control...

hi y'all need an answer to a question. i got a 67 cuda, but the body is 67 cuda, everything underneath is going to be 74 dart. i am using the big disc brakes off the front of a cordoba, and the big drums off the rear of a cordoba. i have the large bore cordoba master cylinder, and just ordered...

I know you can swap the spindles on the 73 up setup left to right, and mount the calipers behind the axle centerline, as upposed to the stock location which is forward of the axle centerline. Any benefits to this?

Hi everybody I'm at a crossroad on my project. I like the look of 4 wheel discs, but dont like the way i have to put them on the axle for my project car. Would prefer to keep it all mopar and bolt on. I have used a set of 79 cordoba big brakes on 74 dart spindles on the front. I am thinking...