Search results for query: *

I have had this issue for a while on my Duster. I have almost 1.5 inches of brake pedal freeplay. I have measured and adjusted master cylinder pushrod to recomended .020 gap. Still the same so I adjusted pushrod .020 the other way giving it a little preload. Still the same. From what I can...

I have had this ongoing problem with my slow returning Brake pedal and locking up if I hit pedal to hard on my 73 Duster. I have thrown money at the problem after suggestions from many. Had the Booster redbuilt Swapped out the Original prop valve to an adjustable Willwood. Recod master...

My first job on my newly installed hoist was removing this valve. Was still a pain in the *** because of headers but a lot easier than lying on floor. Anyway after stripping the combo valve this is the damage i discovered on one of the pistons/valve?. It is butchered and obviously it has been...

What are the standard bore size for the rear wheel cylinders on a 73 Duster. Its a stock Disc/ Drum setup. My back brakes are savage and lock up on hard braking. My brother mentioned he had the same problem on one of his cars and said that the rear cylinders were to big.

i bought a rebuilt booster from Rock Auto for my duster and it’s junk. Where can I buy a new booster. Everything I find is universal which is ok. But I want to ensure It bolts straight on to my car. Any ideas. I have checked usual places summit, Mancini, speedway, classic industries etc...

Can you buy the Handbrake and Strut levers for the earlier 9 inch drum brakes or are the 10 inch ones the same. If available who stocks them.

73 Duster with Front Discs and 10.5 drum rear. Had an issue with pedal not returning and assumed it may have been booster. Replaced booster and while at it replaced MC. I drove it and hit the brakes and it now wants to throw me through the windshield - very touchy indeed and pedal still not...

I replaced the rear wheel cylinders on my Duster. Went to bleed brakes and grabbed my 1/4 and 5/16 open ender as either are usually the sizes for the nipples and they didnt fit. Found out the hex on them is 9/32. Now I thought had a well stocked tool box but 9/32 is not something I keep. AC...

Is there any such thing or were all the SBP 10" brakes narrower

Hi Folks Found a seller on Ebay that does a complete rebuild kit for 73 up Brake Booster however cost is $246 delivered to Australia. Checked Rock Auto and can buy a complete rebuilt Cardone unit for $207 delivered to Australia. WTF! why would you be bothered doing it yourself. I think...

Are the 1970 - 1972 10" rear brake drums the same as 1973 - 1976 10" drum except for the bolt pattern. I have a 8/34 71 rear end in my 73 duster but want to replace the axles and rear drums for the later set up. Wil they be a direct fit?