Search results for query: *

Some back ground 69 notchback Cuda, have 318 auto with center console, I have installed under dash Knee Knocker A/C unit have not charged the system, on the fence if I want to use it, had a friend of mine along for a ride , he had no leg room with seat all the way back, looked at Classic Air...

I to am using Evans Coolant, new build engine, so no old coolant in the whole new system, used Evans from the get go,have a slightly built 318, have a 22" Champion 3 core alum. radiator, stock 5 blade none clutch Mopar fan blade, with shroud , have a 180 degree thermostat, running a 16 lb cab on...

Installed a Sanden a/c compressor, have a 1970 318 v8, with power steering ,and lower pulley has 3 grooves, have belts installed but only make contact with the fan pulley for a small contact area so the fan is slipping and engine over heating does any one have a photo of how they have there...

Hi, can/does anyone out there have a good photo of the area on the fire wall where the a/c hoses go thu for A NON-FACTORY A/C car , I am installing an under dash knee-knocker a/c unit and need to drill the holes for the a/c hoses to go thu the fire wall, I want to make sure I clear the dist. I...

Hi , looking for a good set of the tubes that go from the heater box up to the defrost vents in the dash of 69 cuda.

Hi , i bought a scs frigette under dash a/c unit from another memeber on here, i am in need of the wiring diagram to hook up the compressor wireing and the under dash unit. Does any one have that information???