Search results for query: *

I am not exactly sure what these are for. I know they are from an LA Engine and they are brackets for mounting front accessories. Possibly Alternator support or part of the RV2 / c171 Compressors? Cleaned and blasted ready for your project, Asking $20 OBO plus shipping from 15642 to you...

Here is a cheap spool: A Welded open diff with berarings and races for the 8.75 / 8 3/4" Rear Asking $50 OBO Plus shipping from 15642, PA I have cleaned it up and every thing looks as it should for this type of part. The welds are all cracked from use, but it does not turn the spiders/ side...

Cleaned, Blasted and ready for your project: Saginaw Style LA Block Power Steering Pump Brackets $10 Plus shipping from 15642

Slant 6 Car (9.25/10") or light duty truck clutch cover 122T flywheel. It is the Large Hub for 1968-1987 Engines. Will fit a 1960-1976 Engine with an adapter ring (I Have one of those available too for a separate fee) Cleaned , blasted and ready for your project. I recommend getting the...

Speedometer gear adapter with factory clip and retaining bolt. Asking $30 OBO plus shipping from 15642. USPS MO or Personal Check for payment. Thank you.

Cleaned Blasted and Ready for your project. Dipstick Tube only - I believe it is from a 727/Big Block combination. $15 OBO Plus Shipping From 15642.

I have A complete Slant 6 (225/ 198 RG Block) Dual Exhaust Setup Minus Headers from a '62 Valiant. Can easily be adapted with some extra bits of tubing for a longer wheelbase dart scamp etc. Setup for use with Clifford Shorty Headers. I cut the tubes a bit short when removing at the mufflers...

Asking $220 OBO. Good Working a230 # 3speed. I had it in my Duster before I built the 833 OD for that car. This is the model that has the synchronized 1st gear so You can shift into 1st before coming to a complete stop. Some of the early MoPar 3 speed s have a straight cut non synchronized...

Hello, Here is a Nice Offy # 5041, Dual One Barrel intake for the Slant 6. It is used but in excellent condition. I have bead blasted it so you are ready to bolt this part on, paint, or coat it without much fuss. Asking $500 and that includes shipping to the lower 48 US states. Please PM me...

Hello, I have a 8.75 742 Case Chunk with a 5.57 Ratio and spool for sale. I found that I had 2 of these and I don't need 2 of them. Could possibly work for some eighth mile setups? Nice part that I no longer need. It has been coated some grease that will easily clean up. Has the 7260 2 1/8"...

I know many of you will never need this stuff, but If some one can use anything lets make a deal. Covers $10 Each. Add shipping from 15642 to all. Misc other parts - Spacers / Shims Ring gear bolts Side and Spider gears Make offer if you can use this stuff. Thanks!

Nice, Clean part with bead blasted retaining bolt and clip. Asking $25 Plus Shipping from 15642

This was from a 318 - Cleaned up for your project. I cannot remember if it was from the Oil filter side or starter side of the Engine. $10 Plus Shipping from 15642

Asking $18 Plus Shipping from 15642. 26 tooth Pinion Gear - A bit rusty on the tip, but who isn't. Wont effect the performance of this gear for you.

Hello here is a Nice, not perfect 727 Transmission Lever set. as you can see in the pictures the parts were a bit rusty but are usable. Threads on Fasteners are presentable but not perfect. Will move freely and tighten on your valve body properly. I Have bead blasted everything, ready for your...

4 Barrel to 2 barrel Adapter Plate Was Modified to fit on a Clifford Intake without Clifford's Adapter Plate - See extra Holes Asking $30 OBO Plus Shipping from 15642 Has been bead blasted and is ready for your project.

Power Steering Bracket I believe it attached to a Saginaw Pump. Looks Like an LA Part but could work on others. $15 Plus Shipping for 15642 LA Engine Behind the Alternator Bracket $15 plus Shipping from 15642 Buy both for $25 and Combined shipping of course!

Asking $25 Plus Shipping from 15642 Part is not perfect, there are some little bits of rust near the bolt holes. It may not show in the pictures. I am sure you can buff the chrome to a glorious lustere with some white rouge and a canton buffing wheel.

1970-74ish Stock 1 Bbl Air Filter Housing Asking $10 plus shipping from 15642

I have 3 Holley 1920 Core Carbs for Sale Carb #1 one is on the far left in the above picture - Carb #3 is on the Far right. If you are interested please refer to the Carb you want 1, 2, or 3. Asking $30 Each plus shipping from 15642. All are "Core Carbs" Not sure of the internal parts or...

Just the Tube - no dipstick inside. From a 727, Not sure if it's an LA or B/RB Transmission, or if it makes a difference? Cleaned up, ready for your project. $15 Plus Shipping from 15642.

one Set of spool Mounts Asking $15 Plus Shipping from 15642- Cleaned and De Greased, ready for your project!

Cone Type SG Left overs. $15 Or offer and add shipping from 15642. Cone clutch faces were Milled / Machined, some surface rust from storage.

Asking $115 Plus Shipping from 15642. All Bolt holes cleaned and chased. Helicoil repair on the Speedometer Hold down Bolt hole. Has the Oil Shield inside. Vent is missing the Sheetmetal "Hat" Casting # C-13212-3. 30 Spline output shaft. Cleaned, Blasted and ready for your project.

LA Small Block Oil Pan - I do not believe it will fit a 360. Was removed from a 318 Block. Does not have a drain plug. Hard to Tell, But the Stamping # is either 383, 386, or 388. Cleaned, Blasted, and ready for your project. Asking $40 Plus Shipping from 15642

Cleaned , Blasted, Ready to go.. Asking $30 Plus Shipping from 15642

P5249117 .030" Valve Shims Should Fit all Classic MoPar Engines (not sure on 2g Hemi). LA/Slant 6 and B/RB New old stock sealed package. 16 Shims. Asking $10 Plus Shipping from 15642

Percy's / Patriot Exhaust 66036 Seal For good For sale is Only one side / One gasket not 2 as when new. $20 Or Offer Plus Shipping from 15642

Cleaned / Blasted, Ready for your project. $80 Plus Shipping from 15642

Hurst Shifter - Is free and moves properly. Would need Cleaned and Lubed properly if you intend to use it. Missing Shifter Handle. Has Stamping 1284022M on it. Asking $ 45 Or Offer - Plus Shipping from 15642