Search results for query: *

3300 pound Scamp , 002-3 S S springs ,727 ... Basically a clone of the 380 crate 360 Has a GER 2800 stall ,that actually worked well ,picked a Turbo Action 3200 10 inch converter ..27 inch tall Drag radials ... Would it be worthwhile to replace the Air Gap ,with a Torker 2 340,with the converter...

Like low buck ,here ... D.C. books, had a really good description ,of factual factory oil pan mods ,to increasing sump size ,and matching oil pick up mods. I am at that point.. Any help ,would sure be appreciated. Thanks..

Doesn't matter what engine:....: I ran a Crower solid flat flat tappet,with the "hardened lobes, against basic stock solid lifters... the spring pressures were 130 ,on the seat...340 on the nose... Was using ,the old school Kendall zinc green oil.was never informed 9f ConocoPhillips,buying...

I know they are crazy expensive,...was just curious,if anyone tried a set.... yet. Considered how street able hyd rollers cams ,are.... Was seeing, if anyone had information... (No ,I don't need a set,...I have 12"-13" inches of vacuum,in gear.... ) Just trollin', for new knowledge.

Ported aluminum Eddy's, sold 'em to a member here.. They " flowed 280 ,with the stock valve job" I considered fair. ( Thank you,fellow FABO member..) I always loved the immediate response the W-2 's worked with deep gears (& converters) hammered with.. When I built my 408,( mentally) Spec's...

Read: Enjoy/Hate ,learn & discuss.. http://www.hotrod.com/features/1506-mopar-small-block-intake-manifold-flow-test/#ixzz3k3Okx8SB

Just looking, for actual experiences, here. How hard,have you seen these, worked?

Just something, I have never seen. If you went W-2's,of course you made other changes. Was it worth, the effort. Still feel a W2 design, is worth it. Post responses here,I like all feedback.....

Best bang,for buck (I.M.O.). Share yours.....

In the y2k era: A buddy,had a 72 Dart Swinger. Mild combinations + mild N20 hits,got him to the low 12's(j y. stuff). He picked up ,an aggressive 340 solid roller engine. A new world ,for this guy. Always came in,with a loose rocker. After losing on the street,(more than a few times!). He...

Always went ,Holley double pumper.,and 34-38 @3000-3500. Just trying ,to learn more......

Build a engine,around a already sorted chassis/transmission/ converter combo? I like my 3:55 Trac Loc /9.5 3200 stall/ 002/003. S.S setup. Yes ,I may miss a few tenths. I enjoy what I have. Current setup,400 -ish,360 Magnum. Share your thoughts.

Someone posted a first timer's cam ,recommendation thread. I didn't really agree,with some of the posts(you decide). I threw the biggest cam(Crane/Summit hydraulic 238/248 @ .050,.540 lift) in my 396 . Idled awful,fouled plugs. Was a smog tech at the time. It kicked my ***. Someone threw me...

The craziness, you have seen cast /hypertuectic pistons go through? A low buck rebuild 360,head work /mild cam. 4:10's out back,3600 stall. The owner ,was/is a nimwit. Would spin the Speed Pro hypers,7500 with ,a 150 shot. Nuts,but kind of cool . Those pistons,lived through 4 blocks...

Considering,

A lot of Super Stock guys,used to/still do run higher lift cams,on stock blueprinted heads.Obviously, the ramps are quicker,more aggressive.Obviously,a shorter camshaft life. With today's bolt on,(230,240,250,cfm ) heads, do we really need such aggressive cam profiles.? This in theory.... The...

My high school buddy,had a 350/327 cam ,in a 10:1 350 Camaro. 3:36 gears out back.The Crane blueprint grind,78 overlap. Gas mileage ,was bad.(imagine that!). Does anyone,pay attention anymore?

Stuffed the front cover /water pump assembly.Radiator/ twin fan electric fan installed. Close to light. Share your achievements/frustrations....

Buttoning up ,the Howard's," Retro fit "cam ,I installed. Using the Hughes Magnum setup,didn't work.A trip ,to Ace Hardware fixed it.(sort of). The .150 thick washer cleared,everything,but the keyway. Got pissed off,the 4" Makita gkt me that clearance.... Sorry,for the post. Had to, complain...

Have any stories,or experience? Sounds like a responsive way,to offset the bigger plenums.Holler anyway.....

Sometimes," off the shelf" doesn't work,for some. I usually split intake/exhaust lobes,from different off the shelf grinds. Just recommended one here.First one for me:396 rat.242/[email protected] had it ground on a 112(spray). Should have went on a 107.(solid flat tappet..).Some people,don't follow the...

Went,with a mild Crower 1st time around. Nice can,did what I expected. Bigger heads,more compression. Decided,on a Howard's" retro fit",grind. The Crower,cast iron core. The Howard's, billet steel.Pressed on ,cast iron djst .gear. and cheaper, than the Crower. Simply a better product...

EI watched a 1/2 ton longbed,go from rolling engineless bucket,to trophy winner,96 hours. Sand drags,Pismo Beach. Had all parts preordered,on the shelf. 360 yanked,re-ring,bearing,and oil pump. Slammed a healthy hydraulic cam,Rhoades lifters.pocket ported the J 1.88 castings.Slammed it in at...

Looking at getting one,while my new hyd roller getting ground.Any experiences,or a waste of coin? Please share.

Yes,turbos,are supposedly king.I like spray. Run,more than a few Nos power shot,kits. The Hammel ,10,000 Rpm kits,are a favorite. When you feel a 2 stage hit(350,combined,) you enjoy it. Any relative experiences?.

Measured ,.580 between,retaianer bottom ,and valve guide seal . I'm ,thinking,030 ish.Any rsuggestions?.

On the street.Simply share,you smoking brand C/F brand.Dragstrips, Don't count! This is in all ,in the past,of course....

Been around small blocks,a damn long time(all brands!) Dealing with a 360 Mag short block. The current cam(224@ .050,114 ),too smooth.Tossing the idea of a tunnel ram,with an idea of a 106 ish,230/234,on .050 .This is all rherotical,of course......

Picked up some 1.92/1.62 EQ heads,nice stainless valves. First cam,224@ .050,on a 114.My mistake.Not bad,need more. Couple of intelligent souls advised,narrow lca's,(106 to 109) . Heads will flow 240'ish ,1.92 valve.3200 9.5 stall /727. 3.55's out back.002/003 springs,matching shocks.Can tune...

Got my belated Christmas presents today.Baseline EQ castings.Opened the box,impressed and relieved.Nice ,clean castings.Last set of La Eddy's,awful.Sorry,had to post somewhere......