Search results for query: *

I have just 2 more dumb questions as I am about ready to finish this little project. I put moog offset uca bushings in now before I take it to lesswab do I want to move the front of the control away from the engine and the rear of the control arm toward the engine??? 2 does the components...

does anyone have a picture of a stock fron sway bar installed??? PST sent me some stuff that does not look what I have. and what I have don`t know if it`s right.The bushing attaches to the strut arm. Moe

does anyone have the torque specs for my 64 dart /6.my book again leaves out the information on the pitman arm and I question some of the other specs. any help would be appreciated Moe

I had a helper when I took the old pitman arm off and he said it sure steers easy now!!!!! If I count the number of turns stop to stop on the steering wheel and divide in half, how will I know the position of the pitman is right? I know there is four flat spots in the pitman arm splines @ 90...

I bought a front end rebuild kit from pst and i have a couple questions,and their tech support is close today till monday. 1. strut rod bushings are not anywhere close to what came out per pic has anyone used this bullet type,wich end goes forward??? 2. The idler arm came with one dust cover...

I may have screwed up when I remove the center link from the pitman and idler arm I didn't mark it right or left. Is there a difference??????? Thanks Moe

Does anyone have a alternative method,of removeing the outer shell of the bushing on the lca other than the books way.??? a 1 3/8 tap is kinda spendy Thanks Moe

Ok I know there is a right and left,although I can't find that marking, is there a front and rear????? I pulled minae today man am I glad who ever had them out last time greased them up real good. Moe

Can anyone tell me if PST has them in any kits

I'm am in the process of tearing my front end apart,question due I really need to replace the lca bushings?? Every thing seem tight. Shure would save a lot of work not having to remove the torsion bars. Moe

Can any one tell me what would be considered normal for the rear shocks??? when I push down on the rear I can only get about an inch and ahalf downward travel. It has air shocks from previous owner and all the air is out i think. The car seems to ride like a tank in the rear...

OK guys and gals Heres my dilemma I`ve got a vibration and it seems to be coming from the front end. got new cragars,new tires, checked balance twice,front end alignment. hum!!! still there ,I have one party saying rebuild your front end,so I have it up on stands and front hubs off then my...

I'm going to order the parts to rebuild my front end on my64 Dart. Question what is the advantage to using off set uca bushings. ??? Thanks Moe

Well I finally got my new cragars and tires yesterday but the tire guy Told me I needed ball joints. is that all well he didn't know.So I'm thinking Mabe rebuild the front end,does any one have any experience with PST ???? Moe:violent1: