Search results for query: *

This is my extra set of Commando valve covers. I bought two sets, and used the best from each set on my car. These are the left overs. I would say they could be restored into very good driver quality, or better. The orange stuff on one of them is paint stripper that some dummy (me) let dry...

New Suntex head lamp switch pn. FS-HS38 Not sure what all years it fits. I bought two of them for my 65 Dart so I would have a spare. The other one worked great. Seems to be a high quality switch. $20 plus the ride.

I just had this radiator rebuilt in AZ, and had a custom 3 row core made for it. It is an original 1965 Dart 273 radiator, with all the correct tank markings, but upgraded to a three row! This should cool about anything. I will add pic tomorrow. I did not have them paint it, as they usually...

Re listed my fan shroud on Ebay at a much lower price. Sold my Dart so I have no use for it now. http://www.ebay.com/itm/261086211679?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Very very nice Demon 725 carb. Only 800 miles on this carb! Came on a new built engine I bought, but as it is a manual trany I was better suited with a double pumper. But it ran great with tis carb! I removed the choke but all parts are present, along with a spring kit. Summit gets $387.99...

I got these two kits for Badart on hear, and never got around to putting them on my Dart. So now I have no use for them. These kits are super nice!!! The inner fender braces go from the shock towers to the fire wall to brace them up. And the Radiator brace replaces the flimsy sheet metal at...

Nice single grove pulley. It is small that the stock one so it spins things a little slower. I did not use it very long. Maybe 100 miles. Worked great. $20 plus the ride

Nice used thermoquad. Has holley reman stickers on it from who knows when. But looks to be a very nice core. $10 + the ride

Nice old Offy intake with 340 360 port sizes. Only one striped hole. If I still have that size of helicoil I will fix it before it ships. But no granite I still have one. Other than that this intake is super nice! $75 plus the ride to the lower 48.

Very very nice intake! No striped out holes. This is the old original design. It has the small 273 318 ports. Great vintage intake. $75 plus the ride to the lower 48

Selling off my intakes. This one is the original Edelbrock TM-5 intake from 1971. For it's age it is not half bad. Yes it has had many striped threads. But I have helicoiled most of them. My still need one or two more done. This has never bothered me. Lots of factory aluminum heads have...

original set of push rods. I used a hydraulic cam so I could not use these. Look pretty nice to me. $40 shipped to the lower 48

Like new, on the car about a month and less than 50miles. $40 shipped lower 48!

I have three standard 904 trannys. Two were good working, and one has had some parts stole off of it. $75 each for the good ones $15 for the parts one (front pump missing) and with throw in a good valve body that I remover to install a manual one.

I have 8 small blocks for sale Two complete 318s, one just puled this year out of my dart. I think it is a stock engine with a like new Edelbrock Performer intake on it. $225 One has only 55k miles on it. 100% stock. $150 Two disassembled standard bore 318s. Bagged tagged and...

Good old standard late LA cover. Very very dirty! LOL But under that dirt I think it is the nicest one I have ever had! Looks to have zero corrosion. $15 plus the ride

Pretty nice cover, and very nice pointer. Cover has some corrosion, but to be expected for that old. I think it is dated 67. If that matters ask and I will check. I had been saving it as a spare. $40 plus the ride.

Very nice 8 3/4 housing. Axles are so so, with a few busted studs. Small pattern. $200 Will through in a very nice and super clean 489 housing for $60 more. Just puled. I think it is a 2.73 open. Just cam out of a running car and looks like new The housing is the brown looking one.

I have a nice Carter AFB on ebay right now. It came on a 66 caddy, but may be of use on a Mopar. It is the small air cleaner size. http://www.ebay.com/itm/261060512782?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Nice crack free shroud. http://www.ebay.com/itm/261055456078?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

No idea what this one is off of. Most of it is like new. The plastic center section is even still shinny. Missing a few parts. Secondary spring and plug, one vent tube, and the tab and screw that holds down the primary needles. $25 plus the ride.

Nice carter 9103S Should be a great rebulider. Looks like it came on 1976 and 1977 400 Big blocks. Looks to be 100% complete. Should clean up realy nice. Nice layer of dirt keept it from corroding. Looks like new on the underside. And shafts seem good and tight. $30 plus the ride.

Decent looking 6545S carb. From what I found should have came on 74 to 77 440 engines. Looks to be a good rebuildable core. A little bit of white corosion powder in the base plate but not to bad. Shafts seem good and tight. $30 + the ride

Moved up to a bigger carb so hear is my "experimental" 600 and parts carb. The good carb is a like new 600 manual choke Edelbrock AFB. This is a very low miles carb. I took the top off of the older carb and machined off the choke tower, and modified it for duel feed. Lightened the secondary...

I have a E Body 8 3/4 housing for sale. Local pick up only. Axles are like new. No ware or twisting in the splines. New green barrings (maybe 50 to 100 miles on them). I bought it from a friend just for the center section. First $150 takes it. Can get pic if any one is interested.

I have a like new early 18 spline TF904 converter. The converter was rebuilt I would say less than 3,000mi ago. Worked perfect, and looks like new. Gear is perfect. This has the small hub for the 273 engines. But has an adapter ring on it for later engines. So you get the converter and...

Good used TF 727 for a big block. Out of a big old RV. So it has the bolt on yoke. So that will need converted to slip yoke. Has less than 20k miles on it. So should be a great builder for that race car. $50 pick up only.

Nice used Holley intake. Threads look good. Never ported. Minimal normal corrosion around the jackets. Only detractor is I ground the "Holley" off of the intake as I was going to paint it red to look like a factory 273 intake. $60 plus the ride from 41004.

I have a nice set of 8 of the 273, and 318 floating pin rods. These are the lighter rods. Look really nice. Can get a pic if any one is interested. $30 plus the ride.

New Milodon pick-up pn. 18345 for small blocks. Fits Milodon pans 30935, and 30940. Looks to be for 9in deep pans. Will trade for a 10in pan pick-up, 90 oil filter adapter, or sell fore $35 shipped. Took out of the package, but bran new