Search results for query: *

iv just got a 2'' single hole phelonic spacer, which im going to add to the 1'' i have (so 3''total) on a M1 hi rise air gap manifold im after a bit more torque mid way (1/8) or there abouts running 28x9 slicks 750hp dp and 11.8 @ 112mph my guessing it will bog off the line, anyone...

So I was trackside at the weekend, and I heard a old guy was telling his mates about a 10 second charger, running stock rear leaf springs, that had one on the long leafs removed, and keeping all the front segments. As I sort of know the old guy, i butted in asking who's charger, and what other...

Just a quick question What pressure are you running? Iv just replaced my whole fuel line and pump, and now I'm running 6 lbs throughout the whole pass, whereas before I'd gone from 9 down to about 1 at the end of the 1/4, so not so good. So 6lbs, I can adjust up or down I just wondered...

well got myself today a new fuel pump. quick flow QFT175 billet looks very nice, got a powerflow filter too, so now got to get hose and fittings, then wire it:coffee2:

Another silly question sorry guys What's the general verdict on rear shocks for optimum length I run mopar b body on my dart, and I think they do the job, as the rear body lifts showing the tyre, but........big but Would it work better with say a truck shock? Or a 21" plus shock My...

Maybe a silly question but what's the advantage of increasing the height of the carb on the intake? Currently I have 1" spacer on a hi rise m1 single plane intake, Reason I ask is im trying to overcome a top end issue, it seems I'm either loosing power at the top end somewhere ( i do know...

im after a computer program that some of you guys seem to use to spec components to get HP ideas on engine builds ect I dont know what they are called, and trying to search/ ask for something is difficult. Again, i hope i have explained correctly

Following on from another thread, Post up: 11 second and quicker STOCK 318, 340,360 no power adders no STROKED 1/4 times and trap speed (or 1/8th) gears Stall and converter size cam duration MODS/ ADMIN, can i get this as a sticky please, if not no worries,)

Im doing a bit of research on the fastest small block. must be non stroked no power adders (blown or turbo) and no nitrous so all motor, be it a 318, 340, or 360 I know Locomotion has a 11...something 360, so anything else out there?

i need some ideas on making the car lighter (72 dart) i have no interior except 2 race seats, harnesses, and rollbar i need to try keep the dash for originality i have glass front bumper with alloy irons and glass bonnet i dont want glass fibre doors as they are a pain, i also want to...