Search results for query: *

  1. mguner

    Proper stud knurl diameter for factory 8.75 axles?

    I remember last time I bought a set of studs they weren't quite large enough. I'm not near my calipers or an axle to measure but want to order ASAP. I was thinking .685 for some reason... Anyone have a good answer? It is a 69 B body axle.
  2. mguner

    Lower Control Arm Poly Bushing Solution

    When you put these into production I expect royalty checks! The complaint is always that the lower arm walks back and forth on the bushing when braking etc. There is always space under the torsion bar retainer ring in the cross member right? Either make hex shims to go under the retainer ring...
  3. mguner

    New Interchange Sticky for Suspension?

    I've seen a BUNCH of questions about front suspension swaps. Some are to get rid of or change bolt patterns for various brake or wheel combos. Some are for the Slant to V-8 K member swap etc. I have very little experience with the Early A's in this regard. I know when I put a 71 Duster V-8 K...
  4. mguner

    91 Imperial level ride conversion?

    Anyone know what parts or car to get parts from to swap out the rear suspension parts to get rid of the level ride stuff? I was thinking Dynasty or similar...
  5. mguner

    90-10 shock question

    I bought a set of the Lakewood PN# 40101 90-10 shocks from a Florida member on here a couple of years ago. They were "like new" and fit fine but they act like the valving is backwards. The nose doesn't want to rise on acceleration and the nose dives on deccel. I even put in slant six torsion...
  6. mguner

    Beware DuraLast FB257 Lower Bushings!

    The FB257 lower control arm bushing fits lots of mopars and I've been replacing them for years. The Mcquay Norris (blue box) bushings that Auto Zone used to carry is being replaced by a 2 bushing set in a Duralast box. The price for the two bushing set is the same as the single blue boxed unit...
  7. mguner

    Rear Mount Caliper Brake Hose ?

    Has anyone ubgraded an early model A or B body with late model A/F front discs and mounted the calipers on the rear to allow sway bar use? If so what brake hoses did you use? I need some that come down and in from the caliper banjo fitting.
  8. mguner

    A to B interchangeability?

    I was running part numbers through the Advance Auto website and the 73 and up A body ball joints were the same as 69 B body. I thought I had heard of someone putting later model disc units on the road runners and satellites. My question is about the lower control arms. My newest addition the 69...
Back
Top