Search results for query: *

Looking for new Legendary (possibly other mnfr like PUI) for a 69 Cuda. Looking for white deluxe bucket seat and rear seat skins for a notchback. Also looking for seat buns if someone has them along with the skins. This is a long shot but you never know if someone changed their minds on int...

Looking for a housing for a friend's '71 D100. He's located in Hayward, CA. Let me know if you have something that might work and pricing. Thnx.

Looking for (2) SBP 14" Steelies in SF Bay Area, CA. Without tires is preferred but w/tires is fine too. Let me know what you have.

I am looking for (2) 14" SBP steelies in the Bay Area (possibly the Sac area as well since I may be going to the show tomorrow). Also, I need (1) LBP wheel/tire/roller. Just something to roll a project car around on. It can be pretty much be any combination as long as the size works and it...

If anyone has a small block (just the block - 318/340/360 to be safe) available in the SF Bay area, please let me know. It can be a trashed block but do need the mountng ears to be intact. I just need it for mockup purposes. I am willing to buy/rent it. I just need it for 4-6 weeks and can...

I am looking for the hood moulding of fof a 70-72 Dart. Please describe the condition of all three pieces and if attaching hardware is included and of course, the price. Located in SF Bay area, CA.

I am looking for a new/lightly used pair of QA1 front shocks/springs for a Mustang II front suspension. I haven't figured out which spring rate I need but please let me know if you or any of your car buddies have a set for a MII setup.

I am looking for (2) BBP Magnum 500s (not road wheels). These are the chromed wheels with no trim rings. I would like to find a pair of 14x7s or 14x8s where the chrome is still nice and there is no rust (light surface is ok). I will respray the black so that does not need to be in good shape...

Misc. '67-'68 Barracuda Headlight Bezels (w/small dings and/or scrapes here and there): $20/ea + SH

I am looking for a single goove crank pulley (I believe 5 14") for a '70-later SB. The part number should be #10011. Let me know what you have. I have a brand new dual belt pulley (#10051) to trade or will buy it outright. TIA.

I'm looking for (2) Moon-style spun aluminum wheel covers for 14" wheels. TIA.

Might be a long shot but wanted to see if anyone had any new (or lightly used) Mustang II suspension pieces. Looking for manual rack, spindles (standard not dropped, rotors (preferably 11" w/Mopar/Ford bolt pattern) & calipers (loaded preferred - let me know what you have). TIA.

If anyone has a good used (or possibly rebuilt) BB 727 trans available in the SF Bay Area, CA, please let me know. A friend just bought a VERY unique (more to come) '73 Satellite here and is trying to baby it back home to AZ. TIA.

Does anyone have any front bumper bolts/washers/nuts for a 67-69 Barracuda. I am looking for the 4 main bolts but if you have the smaller end bolts, that would be great. Just let me know what you want for them.

I am looking for a March Performance 1V (single groove) crank pulley part #10151 or 2V (double groove) crank pulley #10170. If anyone has either of these two available, please let me know.

If anyone has a new MII rack that they are not using, I am in the market to purchase one. I have attached a pic as an example below. Let me know what you have. TIA

I am looking for a '69 SB timing cover (timing marks on passenger side) so I can get the new 408 buttoned up for my '69 Barracuda. I picked one up at Fall Fling and didn't see the crack that lay beneath the paint until I recently blasted it. If anyone has one for sale or if you want to swap...

I know that these are available through Moser and other vendors but wanted to see if anyone had a pair of ends (4.5BP of course) available before buying the aftermarket route. TIA.

I am looking for a weld-on brace (see pic below) for an 8 3/4. If anyone has one that you have decided not to use, let me know. TIA.

I am looking for a 489 third member with either 4.10s or 4.30s and suregrip. I am looking for one that is in really good running condition (preferably one that you have used or have personally history on). Let me know what you folks have out there. The closer to CA the better but I am willing...

I am looking for (2) 15x14 or 15x15 Autodrags with 4.5 BP & 4.5"-6" BS. They can be natural or polished but prefer to have ones without any road rash (or at least very little). TIA.

I am looking for a passenger side benchseat hinge cover for a '71 Dart. If someone has one in white - great. If not, any color will do. TIA.

I am looking for a new SB Oil Pump Driveshaft / Distributor Gear with a hardened tip. If anyone has one, let me know what you want for it. TIA

Looking for a 67/68 header panel in very good shape. The closer to the West Coast the better but willing to consider all possibilities. TIA.

There is a kid (actually 21 yo) in the neighborhood who is trying to build up a 440 in a '68 Satellite. He's one of those kids whose had to deal with a series of hard knocks in his life and this project is keeping him out of a lot of trouble (maybe not all but alot of it). I told him I would...

I am looking for vinyl top trim clips/nuts for our '71 Dart. If anyone has a complete set or individual clips/nuts, please let me know. I can attach a pic if you need to know what they look like.

I am looking for a good used 360 center sump oil pan. I am located in the SF Bay Area. TIA.

Does anyone have a windage tray stud kit (or just the studs) for a 360 tray? I am at that point right now and need them before I go on. TIA.

I am looking for a windshield for a 2-dr '69 Dart. I am looking for something that is as clean as possible and preferably not too far from the SF Bay Area in CA. TIA.

I am looking for clean fenders, a pass. door & a front split-back benchseat for a '69 Dart (the benchseat needs to be the correct style for a '69). The closer to CA the better but willing to consider all. TIA.