Search results for query: *

i have a 360 that has flat top pistons with no valve reliefs. i am running stock j heads. i am planning on getting hardend valve seats put in and some porting done. i was wondering if anybody knows how much lift i can go with my cam before i run into clearance issues. the guy i bought the car...

how do you figure out your compression ratio. i have .060 over 360 with flat top pistons no valve reliefs. the block is decked to 0 with .042 head gaskets and i have 68 cc J heads. i went to this compression ratio calculator http://mopowerstyle.com/index.php?pid=8 it says my compression ratio...

Has anyone put the 5.7 hemi in their a body. with them selling on ebay for 2500 to 3000 i am seriously thinking about buying one. one guy on ebay says they will bolt up to the 904 or 727 tranny. what do you guy think. any advise

how high can i safely rev my mostly stock 360. they guy i bought the car from has the tranny set up to shift on its own at 4800 rpm. it is running 9.20 in the 1/8 mile. he told me i could get a 8.80 out of it if i shift it at a higher rpm. i really don`t want to blow it up, i can`t afford to...

does anybody run the moroso electric water pump drive. they say it will gain you 20 hp at high rpm and it is way cheaper than buying an electric water pump. i was just wonering if anybody has one and how they like it. here is the link to it on summit for those who aren`t sure what i`m talking...

i was just looking through some websites that had 318 builds. i came across this article from Hot Rod Magazine on a 318 build they did. they achieved 400 hp with a 318 on a budget. good info! check it out http://www.hotrod.com/howto/113_0304_318_small_block_build/index.html

i`m kinda new to this. i`m building my first mopar. do you think this is a good combination. are there any things you would change. i have 1974 318 block. i am going with the 318 swirl port 302 heads ( i measured them and they are 58 cc) and the keith black Hypereutectic, Flat Top pistons that...

Any of you guys with 318`s use the keith black pistons. i was looking on their web site and their calculator says that with the flat top pistons and my 58 cc heads that my compression ratio will be 10.3 to 1. and on the speed pro site it says with their flat top pistons that my compression ratio...

i was wondering if anyone know the head cc for a 1974 dart 318 and what the cc is on the 302 casting heads.

i have a stock 1974 318 with 8.6 to 1 compression ratio. i am putting on the 302 heads and .024 thick head gasket. what would my compression ratio be when i am done? i have a holley 600 carb, a edelbrock perfomer intake and headers,what size cam should i be running. i want a big enough cam to...

on my last post i was considering either a 340 or a 440 and got some suggestions to just build up my 318 for now. i have a stock 1974 2 brl 318. i have headers and a set of 302 heads to put on it. from what i am told those 302 heads should bring my compression ratio up over 9 to 1. i was...

i don`t know what i sould do. i have a 1974 dart sport with a 318 in it. i want more power!!! i am currently looking at 2 engines. there is the 340 that is completely rebuilt (stock rebuild) for $3900 or a 440 and tranny for $500. the 440 runs but could probably use a rebuild. i don`t have the...

has anyone put headers on a power steering dart sport. do you have to convert it over to manual steering. i ordered the headers and found out after they showed up that they don`t fit on power steering cars. please help.