Search results for query: *

Need a 42RH/ A500 must have the 3 pin connector for overdrive &lockup. If anyone is going to Carlisle can meet you there. Pm for contact info please. Thanks mike

Looking for a 727 Gear Vendors or a 42 Rh or 46 RH for a 340 in a Duster will be at Carlisle. Thanks

Looking for someone with a 727 Gear Vendors overdrive unit . New or used is fine pm for contact info please. Thanks mike

LOOKING FOR A 67-71 DART 2 DR'S ONLY NO RUST COMPLETE OR ROLLING CHASSIS. I'm located in Ontario Canada. Pm for contact info Thanks mike Budget depends on what you might have

Looking for a LA Style roller cam something like a Comp 274 or Lunati 711. Nothing above 560 lift with a 1.5 rocker. And nothing above 235@50 either. Basically something with decent street manners with good vacuum. Going in a 5.9 Magnum build with stock pistons &Eddy heads. Located in...

Looking for a pr of Magnum cylinder heads Edelbrocks/EQ'S OR RHS OR INDY LA MAX. PM with or post what you have for sale please. I'm located in Ontario Canada. Thanks mike

Restoring a 68 Dart 2 door and I need some unusual quarter panel pieces. I'm looking for the area that leads into the trunk opening on each side including the trunk gutters right up to where it meets the rear sail panel area. Looks like the car sat with the gutters full of crap. Entire area is...

looking for a gear vendors overdrive for a 727 trans. Used is preferred. pm with price and location. thanks

Looking for a Gear Vendors overdrive for a 727 trans. Used is fine or even a new one that never got used for a project. Thanks

Looking for a running 440 engine nothing wild. Iron heads ok mild cam ( 509 style as a example) I'm located near Toronto Ont,Canada so places like upstate NY/PA would be preferred. Just a decent no headache style engine. Please pm what you have. Thanks mike

As the title states I'm looking for a Gear Vendors overdrive for a 727 used or a new one that never got used for a project would be great. I'm located near Toronto Ont,Canada. pm if you have or know somebody that has one Thanks mike

Looking for a super clean rolling chassis from 67-72. Only 2 doors #1 70-71 Dart #1a 67-69 Dart (no posts) #2 67-69 Cuda Fastback #3 70-76 Duster or 71-72 Demon #4 71-72 Scamp #5 67-69 Valiants Price based on condition . Dont care about #'s /6 & 318 cars are fine . 8k max almost 40 cents on the...

Looking for a close as possible to mint 70/71 Dart rolling chassis. The more complete the better abandoned projects fine.Auto or 4spd doesn't matter. Even completed cars minus drive train would be ok. Pm me with what you might have or know somebody that might have something like this. Thanks

Looking for a super nice to mint front bumper for a 73 Dart Sport/Swinger. Already have a driver quality one. Located near Toronto Ont,Canada

looking for a drop in center section with either 3:23 or 3:55 gears.Prefer 742 or 489 case. Don't want anything that (needs some work) just a nice quiet gearset with a good suregrip and a dry pinion seal. Located near Toronto Ont,Canada prefer any of the Ontario members(shipping & exchange...

Looking for a S/B hyd flat tappet cam (something slightly over stock 340)something like a Lunati 10200701 256/262 213/220@50 454/475 lift 112*new or used is fine. thanks

need a pre 2001 balancer(not the one piece style with pulley built in) and a weighted 5.9 flexplate. thanks

Looking for a Edelbrock Magnum Performer airgap RPM intake. And a hyd roller cam something around 230@50 and 540 lift with a 1.6 rocker & 110-112 centerline

Looking for a Lunati 703/403 cam for a small block. Pm with price and location.

Looking for a pr of Edelbrock aluminum heads for my 360. Pm with price and location. Thanks

Looking for a 833 4 spd overdrive to install in a Dart. Must have the A body tailshaft & shifter mount location. Cast or Aluminum is fine looking for a bolt in and go trans not a rebuilder.Only need the trans. Located near Toronto ,Ont Canada.

Looking for a 70-72 duster hood or one from a 71-72 Scamp. Will be at Carlisle next week. Somebody must know somebody with one really need this car is going to paint soon. Thanks

Looking for some parts from anyone heading to Carlisle in July.70-72 Duster hood or a 71-72 Scamp hood must be super clean.Front & rear bumpers for a 71 Scamp or 70 Dart rear & a 70-72 Duster front bumper looking for real nice driver quality.Black Scamp/Dart door panels and rear panels other...

Looking for 70-71 Duster/Scamp front fenders,hood,lower valance grill & bezels and a front bumper & brackets.Will be at Carlisle in July.Looking for super nice pieces. thanks

Looking for 70-71 Duster/Scamp front sheet metal.Both fenders/hood/lower valance/bumper&brackets.Will be travelling to Cincinnati/Cleveland Ohio area passing through Detroit from Ontario in the next 2 weeks.Looking for super nice pieces. thanks

Looking for a set of used Schumacher bigblock tri-y's. Someone last week posted they were going to be selling their used set(they upgraded) I cant find the post. Person was in Ontario,Canada.If anyone read the post or remembers it please forward it to me please. Thanks

Looking for front fenders /hood/grill/bumper for either a 70-71 Dart or a 70-71 Duster or Scamp Prefer Ontario Canada but will travel to upstate NY or Detroit area.Looking for super clean pieces.I'm in southern Ont thanks

Needed 70-71 Dart front fenders/grill/bumper/lower valance /hood latch-release.Will be heading to Carlisle PA area in the next few weeks travelling straight down I-81 from Watertown NY.Looking for rust free nice components and willing to pay fair price.Just pm me if you have these parts or know...

Looking for a 67-69 Barracuda Fastback rolling chassis.Must be rust free. The more complete the better.Willing to travel up to 10 hr's from Buffalo area for the right car. thanks mike

Looking for a 67-69 Valiant rolling chassis.Must be rust free. The more complete the better.Will travel up to 10 hr's from Buffalo area for the right car. thanks