Search results for query: *

New, in-the-box valve springs...$100 plus shipping from the Savannah, Tn area. PM me here if intereted, thanks...wb

New, in the package, 7* 1.400/1.969/.690...$70 shipped in the lower 48 USA. PM me here if interested, thanks...wb

Misc carburetors, see the pictures for condition and base stamping numbers, and enquire as required. Located in the Savannah, Tn area, pm me here for more info and shipping costs. Thanks for viewing... Note...the one 4640 is missing some parts while all others are good rebuildable cores. I...

One new set of Comp Cams 10* chromoly steel retainers 740-16 in the package, $85 shipped in the lower 48 states. One new set of Comp Cams 641-16 3/8"-7* single groove valve locks, $35 shipped in the lower 48 One new set of Comp Cams 612-16 3/8"-10* single groove valve locks, $35 shipped in the...

I have a friend that has a 1971 340 he'd like to sell so here's the scoop on his 340. If you need, contact me here and I'll forward his contact info to you, then. Thanks, much appreciate...wb 1971 Mopar 340 Engine . Run's, will need to be gone through . Block casting number # 2780930 -340-5 ...

A very nice pair of 9755S 750 Carter AFB carburetors, bought for my 426H project but not used. These are clean and used but in very nice condition, $450 plus shipping from Savannah, Tn. PM me here if interested, thanks...

This set has been on the shelf for quite a few years...one complete set of 440 Source 383 stroker pistons, 4.274" (+.030"), 1.32" compression height, .990" pins, flat tops with valve reliefs (for approx .700" lift camshaft), made from 2618 T-6 forged aircraft grade aluminum, lands cut for 1/16"...

I have 2 new pairs of Schoenfeld slip-on 3-1/2"x16" collectors for 1-7/8" primary headers. They'll need the tabs welded on when you align them with your primary tubes. $225 plus shipping for both sets, from Savannah, Tn 38372. PM me here if you have an interest and thanks for viewing, much...

New Comp Cams 986-16 dual valve springs with 744-16 retainers. Will work on LA small block chrysler or SL6 engines, $150 plus shipping from Savannah, Tn. PM me here if interested and thanks for viewing this ad...wb

Nice Moroso B/RB chrome valve covers, very nice, no rust or damage, $95 pr Used steel 833 shift forks, $125 pr New steel 833 shift forks $175 pr Fresh 8" A-1 converter with out-of-cert 6 bolt flex plate and bolts, $500 New center sump B/RB oil pan, $120 Chassis Engineering ladder bars with new...

One pretty nice/low usage 850 Mighty Demon annular discharge carburetor. The older BG units that were very nice with all the adjustable bleeds, etc. I bought this 8-10 yrs ago from a fella that had attempted to use it on a 427 BBC street car that was pretty much a stock L88. He claimed it didn't...

I've had thes a few years but I no longer have any use for them so... Set of 16 NOS MP 2946353 dual valve springs...$160 plus shipping K&N stack/valve cover filters...$50 plus shipping 8" 727 A-1 race converter, new hub and freshend by SpecRite of Redding Ca, 4800+ flash...$450 plus shipping...

Complete Big # EFI set up (not the engine), Indy manifold and valley plate, unknown throttle body, fuel rails with E85 Bosch injectors, ECU, harness, complete, dyno time only...$2500 plus shipping from Savannah, Tn. PM me if you have an interest, thanks...

This is a virgin set of 915 B/RB cylinder heads, cleaned/mag'd/cooked /blasted/hard seats installed on the exhaust, new 3/8" K-line guides, spring seats cut for 1.550 springs, New PEP 2.125 stainless intake valves, New Ferrea 1.74 5000 series stainless exhaust valves, comp valve job, guides cut...

NOS Hays 130T 8 bolt aluminum flywheel with bronze heat shield. Use this for a 10.5 or 10.95 B&B type pressure plate or possibly soft-lok set-up. $350 plus shipping from Savanah, Tenn. If you have an interest, please PM me here, thanks...

Deleted

New, in-the-box quick ratio Mopar 20:1 steering chuck for production manual steering boxes. The factory uses a 24:1 so this will have a little more effort to turn the car, not for power steering lovers! $235 shipped USPS flat rate in the continental US. PM me here if interested, thanks!

Fresh set of 915 castings and 906 castings- cleaned, mag'd, shot blasted, K-liners, Ferrea 5000 series stainless valves (906, 2.08/1.74...915, 2.125 PEP, Ferrea 1.74 ex), comp valve job, 911-16 Comp Cams springs, spring seats cut for 1.550 springs, guides for teflon-type seals, hard exhaust...

I've had this sitting on the shelf for a few years, new Engle KV-2 solid lifter B/RB 3 bolt camshaft, 247* @.050" 276* advertised, 108 ICL, 107* LSA, .373 lobe lift/.560" lift with 1.5 rocker arms. This would be a great cam for a medium bracket race build...$150 plus shipping.

For those of you that might have a series 3 carrier/powr-lok/spool and desire to use 4.56 and lower (pro 9310 4.30 and numerically lower), I have an new old stock Mr Gasket spacer w/bolts, $40 plus USPS flat rate in the lower 48 states, Pm me here if interested...thanks for viewing...

Direct Connection RB rods, from the '80s, hemi forgings for the 6.76 cd RB engine, better than the std LY or 6pk rods, SPS bolts, beam polished, x-rayed (back then) plus all the hoopla about how great they were. These were in a 440 that saw very little run-time, $300 plus USPS flat rate shipping...

1969 383 shortblock, all race grade machine work, 010/010 forged crank, oem beam polished/mag'd/shot peened rods, ARP wavelock bolts, TRW 2315 forged pistons, Speed Pro ductile/moly rings (.020/.018 end gaps), Clevite 77 bearings, brass core plugs, MP intermediate pump drive shaft, Melling...

Reproduction 64/5 B-body/A990 type aluminum seat brackets for A100-type bucket seats. Made by a Moparts member a couple of years ago, high quality, new in the box plus new A100 type seats. My project was canceled so these are available, $500 plus shipping from Savannah, Tennessee. PM me here if...

Right/passenger side Sheetmetal stove, probably for an LA engine (don't know year or model), decent condition, no broken tabs...$20 plus shipping from Northern Calif. PM me here if interested, much appreciate...wb

472 stroker hemi, built by Moran Racing of Taylor, Mich. This engine was built 5 years ago and never installed since built and dyno tested, 579hp/640ft lbs. Note, this is a Big3 EFI, Indy manifold, fuel rails w/Bosch injectors set-up for E85. PM me for details and the info I have when I bought...

Good used 742 case 2.76 and 3.23 gear sets in good condition. You pay shipping and they're yours! PM me here if interested. Thanks, much appreciate...

I am moving and have run across several EUCs, resistors and regulators, don't know the condition but they all worked a few years back. FREE (or they get tossed), but you pay the shipping from Northern Calif. PM me here if interested, thanks.

Very nice 230 three speed manual trans, shifter, bellhousing, etc. $300 plus shipping. Located an hour north of Redding, Calif. PM me here if interested, thanks. I also have an LA/small block bellhousing for this transmission, $150 plus shipping.

BG 850 Mighty Demon carburetor, has all the bells and whistles they had 8 years ago, idle ease, annular boosters, 50cc pumps, a great carb. Comes with a new kit...$375 plus shipping. Pm me here is interested, thanks!

NEW Slant 6 parts: New 010 rod brgs $40, 010 main bearings $45, cam bearings $25, Cloyes roller timing set $60, Offenhauser 4 bbl intake manifold $210, NOS Hooker 3-into-1 headers $375. NOS Erson standard length 198-225 chromoly pushrods, $45, Melling oil pump, $45. All prices do NOT include...