Search results for query: *

This is a 904 727 reverse pattern valve body. It was in a 1970 904, but would not fit my later 1976 case (See last picture). Worked great in the 904. Sold engine and trans, the buyer did not want the reverse pattern vb, so I put a regular vb in for him. $200 shipped to continental US. Located...

This is an ‘03 5.7 Hemi that has been bored And stroked to 395 cubic inches. Has Callies Compstar 4340 crank and H beam rods, Mahle pistons, Comp 268 Hyd.Roller, 92mm throttle body, Accel injectors, Hooker B-body swap headers. This is a very nice, streetable Motor, perfect for a daily driver...

Edelbrock small block LA Air Gap that is modified for fuel injectors. Comes with the fuel rails shown. excellent shape. It has a GM fuel regulator mounted on it. There is also a port tapped for a fuel pressure gage on the driver's side rail. It also has a bung for an air intake sensor. Located...

Small block Offenhauser tunnel ram. Has the dual spread bore top. Carbs NOT included. Located in southern IL, 62899. $520 shipped to continental US. Prefer US Postal MO. Price will be lower if you pick it up. PM if interested.

------------------ Set of Comp Cams Solid roller lifters for small block. These were rebuilt by Comp several years ago and have been soaking in a tub of oil every since. These have a .800 wheel. $350 shipped to Cont. US. Located in Sullivan IN 47882

------------------- Small Block Hyd. Roller 380HP crate cam. Never been ran. 288 IN, 292 EX, .501. .513 with magnum rockers. 108 LSA $225 shipped to cont. US Located in Sullivan IN 47882

------ This is a set of std. bore 4.04 TRW 340 Pistons. Tops look to a have been glass beaded, the skirts are in great shape. They could use a good cleaning. I do not have the pins. Will take $110 shipped to cont US. Located in Sullivan IN 47882...

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- This is a cast core Racer Brown solid roller 71R. 274 IN. 274 EX @.050. 590. 590 lift...

This is a cast core Racer Brown solid roller 71R. 274 IN. 274 EX @.050. 590. 590 lift 105 lobe separation $175 shipped to cont US Located in Sullivan IN 47882 (Home of the Pothole) Might trade for a roller in the 250@050 range let me know what you have... Raising money for Old Yeller...

............................ This is a set of std. bore 4.04 TRW 340 Pistons. Tops look to a have been glass beaded, the skirts are in great shape. They could use a good cleaning. Will take $125 shipped to cont US. Located in Sullivan IN 47882 (Home of the Pothole) Trying to raise money for Old...

..................... This is a cast core Racer Brown solid roller 71R. 274 IN. 274 EX @.050. 590. 590 lift 105 lobe separation $225 shipped to cont US Located in Sullivan IN 47882 (Home of the Pothole) Might trade for a roller in the 250@050 range let me know what you have... Raising money for...

............................ This is a set of std. bore 4.04 TRW 340 Pistons. Tops look to a have been glass beaded, the skirts are in great shape. They could use a good cleaning. Will take $125 shipped to cont US. Located in Sullivan IN 47882 (Home of the Pothole) Trying to raise money for Old...

...................... ...................... This is a set of 2.15 W7 Intake valves. They are the shorter 5.3 length, and I need the Xiong ones. 3/8 stems. Full set of 8 valves. These could be cut down to use in W2 heads. $65 shipped to cont. US or can deliver to Indy on March 7th

...................... This is a set of std. bore 4.04 TRW 340 Pistons. Tops look to a have been glass beaded, the skirts are in great shape. They could use a good cleaning. Will take $125 shipped to cont US. Or will deliver to Indy on March 7th. Located in Sullivan IN 47882

................. This is a cast core Racer Brown solid roller 71R. 274 IN. 274 EX @.050. 590. 590 lift 105 lobe separation $225 shipped to cont US or can deliver to Indy on March 7th. Located in Sullivan IN 47882

Magnum M1 EFI intake, this is the EGR version, however, it is blocked with a pipe plug in the plenum. You can remove the plug if you want to run the EGR. These are good intakes if you are using a stock EFI system. A stock throttle body bolts to it without an adapter. It includes the install...

Comp Cams #20-602-9 262HR cam. Short snout for computer controlled magnums. Specs: @.050 206 IN duration, 210 EX duration. 480 IN lift, 512 EX lift with 1.6 rockers. 112 lobe separation. This cam was installed in block, but never run. I do not have the original box...

I have a set of never used 810 casting W2 heads. These are the race castings, not econos. $600. Located in Sullivan IN 47882 . I do not want to ship these, but I will be going to the Indy swap meet on Saturday March 2nd. I can take them with me if anyone is interested.

Edelbrock dual quad intake for 5.7 hemi , has not been used. Located in sullivan IN. $250 shipped to continental US.

I have a set of used Brodix B1BA smallblock heads . I bought these off a Moparts member awhile back. They have been sitting ever since , so it is time to sell . I have the rocker stands, but no shafts or rockers for them. They need a good cleaning before use.The pictures make them look cleaner...

8 bolt B&M flexplate . I bought this by mistake a couple years ago. It has never been bolted on. SFI sticker says April 2013. Located in sullivan IN 47882 . $65 shipped to continental U.S.

This is an edelbrock dual quad intake for a 5.7 hemi. Never bolted on. $250 shipped to continental U.S. Located in sullivan IN 47882.

I have an unused set of W5 heads , never been on a motor. $1000 I also have a new Indy single plane I would sell with the heads. $1250 for heads and intake. I will not sell the intake separately. Located in Sullivan IN 47882. Shipping is extra , or I can deliver to the Indy swap meet on...

I have a used MSD # 8536 distributor for BBM. $135.00 Shipped. Located in sullivan IN. PM me here. Thanks!