Search results for query: *

It has been in my stable for probably 10 years. Always a project that got worked on ever so often. Other Mopars got work first it seems. All rust repaired and epoxy primed and paintd with PPG single stage a few years ago. I call it driver quality. I redid all the brake with new lines...

Soild project, body/paint done about 2 years ago. Engine/trans is out. New: SmittyBilt A100 style buckets, oem seat goes with if wanted, never run tires, clutch pressure plate, ALL brake system OEM, also 2 EXTREA complete 225 1962 slant engines and 2 3 speed manual trans plus boxes of new...

Offering my 62 Dodge Lancer2 door post, 330, 170 slant, 3 on tree, I did the body/paint a few years ago, B3 blue, I call it driver quality and better. I'm sure a door 'ding or two can be seen. I rebuilt all the brakes.. new lines, shoes,drums. all lines, cyl. etc. It has Smittybilt A100...

Two door, 3 on tree car, all body/paint work was done last year in '68 B3 blue. NO rust. Not perfect but better than driver quality. Eng (225)/trans out for refresh. Comes with oem 3 speed trans or A230 3 speed with floor shifter and hump. I have the oem front bench but comes with A100 style...

Old, wore out and getting down to one or two cars. If interested, contact me for better pics. I got this car 6-7 years ago, complete 170 with 3 on tree. I did all the body work, NO RUST, epoxy primed high build urethane primer, sealed and topcoated with acrylic urethane. Shot with PPG...

$5700.Complete car but pulled the engine/trans. All body work done, NO rust, B3 Blue. Good glass, and decent trim. I have the oem front seat but has A100 style new seats. Comes with a A230 ? '70 3 speed trans with shifter or oem trans, new tires. Floor hump. New windlace. Recored original...

Second car offered. 98% done. Drive any where car. Poy 318, PB. Manual brake/steer car, NO AC, all body/paint work done on a nice pretty darn straight example. NEW beside body/paint: AMD full floorpan, windshield and back glass with gaskets,tires, some brake parts, carpet. Great...

I know, its a B body and yes I am also a member on FBBO, but our site here is so active and members here are diversified, so here it is. I would like the thin the herd as at 74, I seem to be wearing out and slowing down. Oriiginally a slant, 3 on tree, heater delete, I added a radio delete...

Real car, 318 2 bbl , console at ps, pb, ac removed. All body work/paint done. All rust was cut out and patch panels fabbed with 18 ga. epoxy primed, sealed, PPG acrylic enamel topcoat. Never any rust on frame, but had usual rust in lower rear qtr. floors, bottom of fender, etc NEW: decals...

Nope they aren't A bodies!!!! But... I will list them here as I bet 99.9 % of the people here are way smarter than those reading ads on Marletplace and CL!! OF which will ask: are both for sale, and another dozen assorted idiot questions. Both are Texas cars, good Tx titles in my name...

$4100. I like seeing prices first. Good Texas title runs/drives, I got it couple year ago, have been working on it off and on with the others in the herd. Thought I would offer it here. The good. It is a 71. Life long Texas car. Never hit I can see. It was all there except the seats and...

I have the hots to build a 50's Mopar so I am offering this RUSTFREE slant col auto, ps, pdb, It is an SE AC car but I have removed that but still have all.. Good running driving car. Mileage reads 97,000 and by looks of interior that is accurate. All gauges work, but heater core leaks and...

yes I know its an F Body!!! and was it next step after the 70-6 Duster.... .RUST FREE, runs/drives great.225 super six, col auto, pb,ps, air, side window louvers go with....... about as close to a survivor as you will find, new 215 x 70 15 tires, new 15 x 7 American Torq...

offering this dry Austin, Tx RUST FREE Volare SE, pretty close to being a total survivor. 225 super six, 95,000 mi car. col. at, ps,ps, air.. runs, drives great, pretty darn straight, just a couple of small dings. bumpers look like new. everything under the...

some of you might remember me talking of selling off most of my cras and moving to s w tx. well I have and sold all but the 62 lancer I plan to keep. the rest are all sold except .the 65 dart gt. it is in Missouri and my neighbor has...

moving sale, I of 4 cars left. this was a very roller when I got it. 3-4 rust spots the size of a silver dollar. ( 1 1/8 IN dia!) taken to bare metal epoxy primed, sealed, acrylic urethane, correct gold. pant laid down nice...

looks like I will be moving to Tx. I have a buddy with a transport that can haul them all there cheap enough but I would rather thin out some. the 63 dart gt, slant, ps, taken to bare metal, epoxy primed, sealed shot with arcylic urethane...

third car offerred, I will sell one or two of the 3. you pick if interested. this is the rougher of the 3. I took it to bare metal . epoxy primer, urethane primer, epoxy primer sealer, acrylic urethane topcoat. I fabricated repair metal for rear...

this is my second dart off erred. original black with red/maroon interior, PB slant. ok car. this was nice body, some rust in rear qtr wheel lips, replaced with metal. it has a couple dings I didn't get out as you can see in rear pic. .. taken...

I will offer 3 darts here, in separate ads. 63,65 darts gt slants, and this 64 dart gt that was slant and and good 318 ready to drop in. I would like to thin the herd some, I feel priced anywhere from very fair to plenty cheap. I did not price...

offering this project. here are some details. taken down to bare metal, epoxy primer, urethane sanding primer, sealed, shot with oem white, acrylic urethane. driver quality, not s show car. good glass, all chrome is there, the right rear piece is...

I have half doz cars and I will offer two here for sale. the 65 dart and in another ad. a 62 lancer 2 door post car. clear Mo, titles. I like them, price is firm, they don't eat! if interested I can answer all questions. probably won't list...

looking at thinning the herd some. offering:62 dodge lancer 170 model, 2 door post car... slant six ( 170 ci), 3 on tree...... last summer I did all the metal work, took it down to bare metal, dtm epoxy primer, urethane and polyester primers, sealed, painted it...

these cars are projects in process.. all have been sanded down to bare metal, epoxy primed, sanding primer, sealer, finish coat is acrylic urethane. all rust repaired with metal, some I fabricated. above average driver quality. would not take much to make any of them...

thinking about reducing the herd and building a heated addition to my car shed. been working on this for over a year off and on. rust free body, as in no rust.... except small place on front of hood. perfect floors, frames, was undercoated car....d...

i would like to thin the herd a little. offering 65 dart gt 225 slant, console auto, 7 1/4. I replaced the rust at rear wheel wells some floor, with metal fabed patch panels, took it down to bare metal, epoxy primer, urethane primer, finish...

reducing the herd a little. this is another project car i'm offering. 2 door post, 170 3 on the tree. very original car. actually has original headliner. couple of very small mouse holes in it though. original seat covers, but needs redone...

i have 5 early A body cars, I would like to thin the herd some. keeping the 65 cuda for sure. offering 63, 64, 65 dart gts, and 62 lancer. I will list separate ads for each as time allows. I will sell off only 2 of these. just want to thin down...

thinning the herd alittle. its that or I will be buying materials to add to the car shed with an enclosed addition this fall. offered is a very solid roller with choice of good running early 70's 318 or a complete 225 slant that is apart...

all original right down to the hubcaps, 170 3 on tree, engine turns over, rear qtr rust repaired with patch panels. very straight, good glass except one vent window cracked. original radiator recored,good title.$1900 thinning the herd a little...