Search results for query: *

A friend of mine has a 1971 GMC K25 truck with a 350 & 4bbl Edelbrock. Needs an air cleaner. Does anyone have a factory GMC/Chevy air cleaner for this vehicle? Thanks.

Looking for an OEM or NOS ignition switch for my '71 Dart. Must be in very good condition. Would prefer NOS.

Car is a '71 Dart. During the course of my heater box repair I lost 1 of these clip things that goes onto the door lever and connects to the end of the cable. Anyone have an extra one they can put in an envelope and ship me? Thanks.

I bought another '75-'76 unleaded filler neck from another member on here but there is pitting/rough surface where the grommet seals around the tube. I'm concerned about using it because it's a rough surface with pitting and I think fuel will leak out around it and/or cause fumes. Does anyone...

I need a NOS sending unit lock ring please. I have one for my new gas tank project but it got destroyed last time I moved :( LMK if you have one. Thanks.

My car is a 1971 Dart which came with this breather stock: Mega Parts USA - Reproduction, NOS and Used Mopar Muscle Car Parts Notice the extra hose fitting for the fuel vent line. I lost mine and can't find it for the life of me. Does anyone have 1 of these laying around they can sell me...

Looking for a door jamb switch for my 71 Dart. See pics. The nut is a 9/16. If you have one new or used let me know. Thanks.

I need the trunk light assembly (wiring and socket) for my 71 Dart I also need another map light fixture + wiring if possible, at least the connector that goes into the map light. I am adding this to the driver's side. Here's a pic of the map light I'm looking for. I'd like to find someone...

I have a 71 dart with 2-speed wiper motor. I need the little bracket that goes from the wiper motor to the pivot linkage. The bracket should have 1 hole in it broached to fit the motor, and 1 stud on it. If you have the captured bushing/wave washers also that would be helpful. Thanks

Looking for a 75-76 unleaded filler neck off a Dart, Valiant, Swinger, or Scamp. Not Dart Sport or Duster. Needs to fit into my 71 Dart. Could use a cap also if you have it along with the filler neck.

Need fuel tank pad for 71 Dart (this thread is for @zigs to reply to for feedback)

I have a 71 Dart with a 727 behind a 360LA. I need another dipstick tube for it that I can do the modification on as described in this thread: 727 dipstick tube boot style Does anyone have a stock dipstick tube laying around that will work correctly with my car? It doesn't matter if it's...

I made another thread here the other day: 727 inspection cover I am looking for the little piece that goes on the 727 inspection cover. An example of it is the little piece at this ebay link: Mopar Transmission Dust / Inspection Shield Small Block 727 - 273 318 340 360 Does anyone have just...

I'm looking for a 360 oil pan, mid sump, and pickup tube. I am willing to go new but I want a stock looking oil pan. I found these new ones on ebay but they look super cheap, has anyone used them...

There's a variety of misc parts for my 360 LA build I need. I'm hoping someone has a donor small block engine, or better yet a donor 360, with these parts available to strip off and ship. I'm hoping someone has most/all of these parts so I can pay for shipping once, as some of these are small...

I have a '71 Dart and the driver's side door does not lock. If I press the lock down, I can still push the button from the outside and it opens the door. I checked to make sure the rods and linkages are hooked up correctly, and it still happens. I think the door latching mechanism is internally...

On my 71 Dart I have recently installed 11.75" front disc and 10"x2.5" rear drums. I am in need of a proportioning block, preferably a 1975-1978 B-body prop block. Please PM ME thanks!

I'm looking for a set of 11.75" caliper mounting brackets. I can pickup in the Portland metro area or pay for shipping. Please PM me pics, thanks!

I'm looking for a set of cop/police center caps for my 15x7 police/cop wheels. I need 4 of them, but not the completely plane chrome kind. I can pickup in the Portland metro area or pay for shipping. Please PM me pics

New member here, I am seeking a fully-functional, all gauges working dash cluster for a 71 Dart Swinger. I can pickup in the Portland metro area, or pay for shipping. Thanks!