Search results for query: *

  1. kiss

    Speedometer cable 64"

    I need a new speedometer cable for my 71 dart, the current one is done for. I measured the cable and it's approx 64" long. This is the same cable that was in the car when it had a 904 so it is the stock cable. It has the larger 7/8" end on it that goes to the transmission and the plastic push-on...
  2. kiss

    727 having a few issues

    Hey guys, I think my rebuilt 727 might have a problem. Here's some info and backstory. Warning, long post, but I want to give as much info as possible. My 71 Dart has a 360 (stock rebuild), and rebuilt 727 (again, stock). I had the 360 balanced during rebuild with the B&M flex plate to account...
  3. kiss

    Removing 727 dipstick

    This might be a dumb question but I need to know what to expect when I go to remove the dipstick from my 727 this weekend. It's in the car (71 Dart). I am converting my dipstick to the boot seal as described in this thread: 727 dipstick tube boot style My question is, is there enough room to...
  4. kiss

    727 dipstick tube boot style

    Has anyone converted their 727 dipstick tube to the boot style? I found this when searching online about dipstick tube leaks: 727 where can I find a new O-ring for the dipstick tube?!? Seems like a good idea, here's a pic from that thread attached. I realize that a tube that isn't...
  5. kiss

    727 inspection cover

    Hey everyone, Please see attached pic. My car we just put the 727 and 360 (both rebuilt) in is missing the inspection cover. I have no idea how that happened. I can't even recall if that transmission had the inspection cover to begin with. It is what it is. Moving forward I would like some info...
  6. kiss

    Correct way to hook up transmission cooler

    I have a transmission cooler, not using the radiator, for my 727 transmission. I have a question on how to hook it up. The cooler is mounted so that the ports are on the driver's side. The cooler is bi-directional so it doesn't matter which way it's hooked up, but I wanted to check on something...
  7. kiss

    Transmission cooler fittings

    I decided on the Tru-Cool M7B cooler and it has arrived. It has 1/2" NPT fittings. I am going to run 5/16 hard line (the flared kind with 1/2-20 threads) all the way from the transmission to the cooler. I found the 1/8 NPT to 1/2-20 inverted flare for 5/16 line for the transmission. What...
  8. kiss

    Transmission cooler advice please

    I need some advice on my transmission cooler setup. Car is a 71 Dart and a rebuilt 360 (stock, daily driver, not high performance) and rebuilt 727 are going into it now. Car is just an around town car mainly, occasional drive up to LA (it's in San Diego). Just for groceries, lunch, etc. No daily...
Back
Top