[SOLD] “HURST” Console Shifter 4/Speed

[hemi572ci]

This is a Mopar Vintage A Body Hurst Console Shifter 4 Speed Transmission.
This shifter was rechromed 6 months ago and still it is in nice condition. The Hurst selector it is used in very good condition and ready to install.
—- SHIFTER BALL IS NOT INCLUDED ——
$475 plus $30 for shipping from Edinburg Tx 78539
PayPal (family and friends)

 

[4spdragtop]

Looks to be a bayonet/slip in style?
Quick question, does the feeler gauge/shim go between the metal piece and the actual shifter(1ST pic) or does it go on the "outside" of the inserts?? If that makes sense.
Thanks
Steve

 

[hemi572ci]

Hello Steve
Yes, you are right, the lock is on the driver side of the shifter.
Thanks Ernesto

 

[4spdragtop]

Thanks Ernesto, but does the shim go right beside the chromed metal on drivers side? Or does the shim go more to the outside?

Hello Steve
Yes, you are right, the lock is on the driver side of the shifter.
Thanks Ernesto

 

[hemi572ci]

The shim go beside the chromed meta on the driver side.
Tomorrow morning I going to send you some pics. Thanks Ernesto

 

[hemi572ci]

Hi Steve
Slide the shim about 1 inch beside the chromed metal ( see pic) to remove the lock and then pull out the shifter. Thanks Enesto

 

[4spdragtop]

Thank you!

Hi Steve
Slide the shim about 1 inch beside the chromed metal ( see pic) to remove the lock and then pull out the shifter. Thanks Enesto

View attachment 1715787005

 

[superstock64polara]

PM sent