[WANTED] .020 340 pistons

[cuda_dave]

Hello, I’m looking for a set of speed pro L2316F 20 or TRW2332P .020 (4.060 bore) preferably new, thank you, Dave

 

[GTX JOHN]

Would you consider .030 and I have Mopar Perf. rings for that
combo. Pistons never driven on street and ring are new in the box.
$275 for everything. Easier to find stuff @ 030 over

 

[cuda_dave]

Would you consider .030 and I have Mopar Perf. rings for that
combo. Pistons never driven on street and ring are new in the box.
$275 for everything. Easier to find stuff @ 030 over

Yeah 30 over pretty easy to fine

 

[cuda_dave]

Thanks John,Thing is It’s already finished honed at .020.

 

[clinton carter]

I have a set of the following:
8 Custom Forged Diamond Pistons 4.06 Bore, 10.5 compression
(compression distance 1.910 1/16, 1/16, 3/16 ring pack .927 pins)
Used for about 100 street miles $400.00 plus shipping Paypal only

 

[cuda_dave]

Thanks Clinton, I had contacted you via Craigslist . I need stock .984 pins. Dave

 

[clinton carter]

Thanks Clinton, I had contacted you via Craigslist . I need stock .984 pins. Dave

Oh okay

 

[66fs]

I have a set of +.020 NOS 72 340 pistons if you are interested.

 

[cuda_dave]

I have a set of +.020 NOS 72 340 pistons if you are interested.

Thanx, that’s what I took out of there, something similar. I want to get a forged piston with approx. 1.84 c.h. ,Dave

 

[66fs]

Thanx, that’s what I took out of there, something similar. I want to get a forged piston with approx. 1.84 c.h. ,Dave

That is what I thought, but that was my best shot at +.020 pistons without custom pistons. Good Luck.

 

[cuda_dave]

Summit has the Speed pro L2316 F 20 listed which I’ve had on order for 12 months now. I doubt they’re in the LA Harbor. Lol I know there’s a box out there somewhere. Thanks everyone

 

[GTX JOHN]

Dave: Did you not tell me you have a stroker crank.
The strokers require a radically different piston with a
MUCH short Compression Height!

 

[cuda_dave]

Dave: Did you not tell me you have a stroker crank.
The strokers require a radically different piston with a
MUCH short Compression Height!

.

 

[cuda_dave]

.

. It’s a stock 3.31 stroke.

 

[GTX JOHN]

. It’s a stock 3.31 stroke.

Sorry = I confused you with Jim who text me yesterday about 030
340 piston for a stroker. If you do not find 020 by next week when I get
back from Mopar Nationals for a day or two before next race I will look.
I have 40 Sets of Pistons of which most have never been run that I need
to organize and measure.

 

[cuda_dave]

Sorry = I confused you with Jim who text me yesterday about 030
340 piston for a stroker. If you do not find 020 by next week when I get
back from Mopar Nationals for a day or two before next race I will look.
I have 40 Sets of Pistons of which most have never been run that I need
to organize and measure.

. Thank you John