gregpurcell
Greg Purcell
This is a 187 big block oil pan from a 67 Chrysler 300. (The 187 is the pan of preference for big block A body swaps)
This pan is not beat up too badly, but it had some water in it and it rusted on the bottom. When I sandblasted it, I blew through in one place (see pic held up to the light) It's too nice to throw away and I'm certain that someone here could repair it either by welding or with a chemical sealer. I'd like to get $25 plus the ride, which should be about $15-$18 in the lower 48. PM Me!
This pan is not beat up too badly, but it had some water in it and it rusted on the bottom. When I sandblasted it, I blew through in one place (see pic held up to the light) It's too nice to throw away and I'm certain that someone here could repair it either by welding or with a chemical sealer. I'd like to get $25 plus the ride, which should be about $15-$18 in the lower 48. PM Me!
