[WANTED] 1963 Dart convertible quarter window trim

-
Status
Not open for further replies.

Alltime18355

New Member
Joined
Dec 15, 2021
Messages
4
Reaction score
2
Location
Florence Texas
Rating - 0%
0   0   0
Contact seller
Looking for the trim pieces that are on top of the quarter panel between the convertible top trim and the door in front of the quarter window. see attached photo

ConDart trim 3.jpg
 
I have a pair off a '64 convertible, but, somehow they don't look like they would fit the space you show. Mine are 9" long, open on both ends, and have an angle cut on one end and a straight cut on the other. They have two stud/nut type mounting clips too.
 
I have a pair off a '64 convertible, but, somehow they don't look like they would fit the space you show. Mine are 9" long, open on both ends, and have an angle cut on one end and a straight cut on the other. They have two stud/nut type mounting clips too.
Yeah.. they look like they need to be around 13 inches... one stud mount in the middle. open on one end and enclosed on the other with a screw hole
 
Maybe it has something to do with the trim line between say a 270 and a GT? I don't know, I figured they used the same trim for the convertible seeing as how they didn't make as many of them as they did other body styles.
 

Status
Not open for further replies.
-
Back
Top Bottom