[WANTED] 1965 Valiant Trim Clips

[Jack Curran]

Hi all,

Wondering if anyone has a few of these clips that they'd be willing to sell or alternatively knows where I can buy them. They hold the side trim of a 1965 valiant on. See pics below.
I need 5 for my Valiant.
All replies appreciated, thank you for your time.

Jack

 

[ZooKypr]

If noone here has them try R/T Specialties

 

[65 Dartman]

These might be the same

 

[Jack Curran]

These might be the sameView attachment 1715667727

Those are perfect! Send me a PM if you have 5 that you'd be willing send over & we can figure out pricing.

 

[BobW]

These might be the sameView attachment 1715667727

What are the measurements of these?
I need of 2 ones that measure 1/2" from the flat to the rounded part, and 9/16" across the flat part, about 1'2" long 'spring' clip, same design as Jack Curran pictured.
Also 2 of ones that measure 19/32" from the flat to the rounded part, and 5/8" across the flat part, about 1'2" long 'spring' clip, same design as Jack Curran pictured.
Also 2 rectangular angled 'base' for the top of the door 5/8" by 13/16", about a 7/8" 'spring' clip

 

[65 Dartman]

Sorry, I can’t measure them. Jack bought all that I had and the package is in the postal system as of 11:04 this mirning

 

[BobW]

OK thanks, I'll search that RT link that was posted.

 

[Jack Curran]

OK thanks, I'll search that RT link that was posted.

If you're not in a rush I can send you some once they reach me. How many do you need?

 

[BobW]

Thanks Jack. If you can measure the rectangular section that will help. If it's 1/2 x 9/16 I need 3. If it's 19/32 x 5/8 I need 2.

 

[Jack Curran]

Thanks Jack. If you can measure the rectangular section that will help. If it's 1/3 x 9/16 I need 3. If it's 19/32 x 5/8 I need 2.

Will do. I'll let you know when I get them.

Cheers,

Jack