[WANTED] 1966 Dart GT LH Taillight Housing

[coalman]

I need a LH tail light housing for above, with all interior hardware. I took mine apart to change the gaskets and the interior lens mounts are shot. Also could use some slider bolts for the trunk finish panel..Thanks a bunch...

 

[moparcuda]

I need a LH tail light housing for above, with all interior hardware. I took mine apart to change the gaskets and the interior lens mounts are shot. Also could use some slider bolts for the trunk finish panel..Thanks a bunch...

can you put a photo of what you need

 

[coalman]

The LH fender housing is cracked and the bezel has one lens mount hole busted out and one stripped, I am looking at JB weld for the busted one and a #10 screw for other one if I can't get a good one. The other one is the mount hardware for the finish panel.

Thanks

 

[moparcuda]

The LH fender housing is cracked and the bezel has one lens mount hole busted out and one stripped, I am looking at JB weld for the busted one and a #10 screw for other one if I can't get a good one. The other one is the mount hardware for the finish panel. View attachment 1715253705 View attachment 1715253706 Thanks

hi,sorry the bezel i have is pitted,you better try to repair your's,,,Yves

 

[coalman]

hi,sorry the bezel i have is pitted,you better try to repair your's,,,Yves

Do you have a couple of those fasteners for the trim panel?

 

[moparcuda]

Do you have a couple of those fasteners for the trim panel?

no,try" mr fastener"

 

[coalman]

no,try" mr fastener"

Ok, thanks for your time and help....