A
alanb2337
Guest
New project to build in the garage - need to make room. I built this Barracuda to stop and handle like a new car. Fun to drive.
Solid Colorado Car - not a rusty midwest car where you can't get bolts loose. Solid frame rails, floor pans, trunk.
Rebuilt 318 with Crane 272 Cam, Edelbrock Intake and Performer Carburetor
New 4 core radiator
Converted to 4-Speed (A-833) with Centerforce Clutch/Pressure Plate
Upgrade to 73 and up front cross member, sway bar, all new Moog components, new 1.00 Firm Feel torsion bars, PST polygraphite bushings
New Flaming River fast ratio (16:1) manual steering box
Upgrade to front disc brakes and 11 x 2 rear drums
8 3/4" rear end with 489 center section
New Yukon rear axles
Upgrade to 4.5 bolt circle
New 14" Weld Rodlite wheels and BF Goodrich Radial T/A tires
New interior rug, original interior, was A/C car - correct dash restored and installed
Located in Clarendon Hills, IL (between Westmont and Hinsdale). Too much to list, extra parts go with car.
$11,300 obo
Solid Colorado Car - not a rusty midwest car where you can't get bolts loose. Solid frame rails, floor pans, trunk.
Rebuilt 318 with Crane 272 Cam, Edelbrock Intake and Performer Carburetor
New 4 core radiator
Converted to 4-Speed (A-833) with Centerforce Clutch/Pressure Plate
Upgrade to 73 and up front cross member, sway bar, all new Moog components, new 1.00 Firm Feel torsion bars, PST polygraphite bushings
New Flaming River fast ratio (16:1) manual steering box
Upgrade to front disc brakes and 11 x 2 rear drums
8 3/4" rear end with 489 center section
New Yukon rear axles
Upgrade to 4.5 bolt circle
New 14" Weld Rodlite wheels and BF Goodrich Radial T/A tires
New interior rug, original interior, was A/C car - correct dash restored and installed
Located in Clarendon Hills, IL (between Westmont and Hinsdale). Too much to list, extra parts go with car.
$11,300 obo
