1969 cuda driveshaft length

[forced 340]

hey guys. i have a 1969 cuda i am working on and was wondering if anyone has a center to center driveshaft length that i can go off of. its a notchback, small block, 8.75, 7260 u-joints, and a 727. everything is in its stock location. thanks guys!

 

[crackedback]

Should be right at 45" or a smidge shorter.

Best to measure your application.

 

[forced 340]

ok thanks!

 

[fishy68]

My car has that combo and the stock shaft was 44-7/8 center to center