1969 Dodge Dart GTS drag car

-

SP3188

New Member
Joined
May 18, 2011
Messages
3
Reaction score
0
Location
norman,indiana
This car was bought in the early 80's as a shell. It was a original 340 4 speed car. It had a 70's paint job on it, it was pearl white and pearl green. When it was finished, it had a .30 318 with a 727 reverse valve body with a 8 3/4 rear, it was repainted maroon with silver down the sides. The car sat for a couple of years and has rust in the usual places.The car currently has no motor or tranny but it will have the 318 back in it. I will try and scan vintage photos of it tonight and post them. I know :worthles: so here is a vid to hold you over it is small cause it was filmed with a ipod touch.



[ame="http://www.youtube.com/watch?v=R5B8pf5qWho&feature=colike"]1969 Dodge Dart GTS drag car - YouTube[/ame]
 
Looks decent from what I can see. I'd like to see pics of the floors and trunk when you get it cleaned out. What is the master plan? Race car, street strip, resto? Get some good photos up, looks like a nice project. Thanks for sharing.
 
ok it's going to be a street/drag strip car. it's my grandfathers car i will scan the pics of it from wayback when and post good ones tomarrow
 

Is it going back to drag racing or returned to the street.
 
I know I'm bad at taking pics but if anyone is interested i will take more current pics and some of the parts i've polished up.
 

Attachments

First 3 are when moved out of it's hibernation for the last 6 or so years. 4th is the new grille and re-painted head light trim rings. 5th is after most of the body work was finished (still have more to do). 6th is engine bay. 7th is the new trunk lid. 8th is driver's view. 9th is original GTS door emblems. 10th is floors.
 

Attachments

11th is more of the floors and 'cage. 12th is original 4 speed pedals and trans tunnel. 13th is polished grille. 14th is polished rear window trim. Any one know if i'm missing any pieces to it ? 15th is VFN 'glass front bumper. The hood is a Harwood part no clue if they still produce them or not.
 

Attachments

If anyone wants to see it back when my grandfather purchased it i'll dig around for the pic.
 
Anyone know the best way to get off old window tint ?
 
The 340 build is about finished im still looking for pics and anyone have a 23 spline 833 for sale prefer non o/d but at this point i dont care
 
-
Back
Top Bottom