1970 Dart 318

[Alabama Dart]

Ok I need help 318 is in the car there are no wires any where
Everything is stripped out of the inside of car

So I need a quick run down on how to temp wire it to see if it will run
Any help would be awesome

 

[CultClassik]

I was thinking about doing this also. If I'm thinking correctly, connect your starter, starter relay and battery wires. Then you'll need to jump power on the starter relay. Should probably run power to the wire that comes to it from the IGN switch, then if you jump the two wires that run to the starter (temporarily, with a switch, etc - one wire is constant + from the battery and the other is the "crank" signal) that should start the car. Somebody correct me if I'm wrong! Double check this yourself, don't take my word for it, I'm going off the top of my head.