1970 Dart Part out

-
Status
Not open for further replies.

7dswinger

MOPAR's rule
Joined
Jul 10, 2012
Messages
382
Reaction score
3
Location
California
Rating - 0%
0   0   0
Contact seller
Sadly I have to let her go to fund putting a new engine in my 72 swinger. This is not a complete car by the way, just what I have left over.
1970 Dart Swinger body, rot free, minor surface rust on roof and cracking on rear pillars on body filler as it was originally a vinyl top. Body is pretty straight, trunk pan is solid, comes with decent glass. - 1200 obo
These were taken years ago when car was together, looks pretty much the same but taken apart and the engine bay doesn't look like that, paint has faded. Grill is not for sale.
http://s100.beta.photobucket.com/user/lordofbluefire/media/enginebayside.jpg.html?sort=3&o=80

frontview.jpg


interior1.jpg


sideview1.jpg


Three fenders, passenger side with damage, could be fixed but more of a fender for patch panels. Passenger side with small rot but undamaged beyond that. Drivers side with small damage. 50 for each

/6 K frame and susp. components, all in good condition but joints need to be rebuilt, not hacked or cut in any way, comes with disc brakes- 100

1974 727 core, needs to be rebuilt but good core - 200

74 318 heads, worked fine when pulled, needs to be cleaned and probably rebuilt - 75

74 8 1/4 rear end, worked fine when pulled, comes with drums attached - 150

Rear seat, pretty good, has some marks and tears and crappy cloth but frame is in good condition - 100

two 70' hoods, one with a corner crushed in but can be repaired, one with no damage. -175 for undamaged one and 100 for damaged one

Distributor - unsure of year, stock one though I believe, came off a running 318 - 30
SAM_0212.jpg
\

Holley carb - usure of type, year and stuff. Hacked up pretty good, only good for parts - 10
SAM_0208.jpg


Holley performance 600cfm carb, 4 barrel. Good condition but been sitting so needs rebuild - 50
SAM_0199.jpg




And then theres a bunch of other random stuff I have that I will post later,
I will try to take new pics asap, if you want more feel free to ask and if you need something feel free to ask me if I have it.

Prices are not set so offer away as I need this stuff gone to put a magnum in my Dart, if you have a good magnum 360 I'd be willing to trade.
 
Interested in the fenders, tail lights, disc brakes and emblems. Where in cali are you? PM sent
 
Carmel Valley, ca. Just out side of salinas. I'm might have emblems but I'm not sure I'll have to check.
 
Hey sorry guys I've had a hectic few past weeks and haven't been able to get onto abodies. I've got some more pics to through up too now though. I'll get back to everyone as soon as I can.
 
I want to sell the whole body of the car as one piece as it's in such good shape, sorry. If I can't I'll let you know though.

Ok folks here's a bunch more pictures and more things I have up for grabs!!!!
I NEED THIS STUFF GONE! I don't need it and I need the money for my 72 Dart.
Again the body's in really good condition NO ROT, minor surface rust and body is very straight, only issue is the dash is a bit cut up but nothing that's unfixable. -1000 for the whole body, plus fenders and hood, bumpers, glass, trim plus much more

Make me an offer on anything including the body.

GOPR0016_zps63c5f918.jpg


GOPR0019_zps9d8537bf.jpg


GOPR0020_zpsa84733f8.jpg


Rear Bumper, good condition, little ding on right side. - 75
GOPR0043_zps77954c36.jpg


GOPR0044_zpsbc1836dc.jpg


GOPR0042_zpsd0eb1ac7.jpg


GOPR0015_zps0799e21a.jpg


Passanger side tail light housing and lense - 50

GOPR0044_zpsbc1836dc.jpg


Front fender flaring, ding up on edges I think it could be fixed - 20

GOPR0037_zpsff8fa33a.jpg


Trim pieces, from all around the car, from the clothe top, some window trim and other stuff, some is in good condition some isn't. - 50 for the lot

GOPR0036_zpsdba1f352.jpg


Passanger side grill bezel, no cracks - 50

GOPR0032_zps3bbe4a54.jpg


GOPR0033_zpsa5da5094.jpg


GOPR0034_zpsd9a37ac9.jpg


Steering column with key, could use a bit of freshening up - 50

GOPR0026_zps92b0c860.jpg


GOPR0027_zpsa238c76e.jpg


318 heads, has some rust on arms and rockers from sitting but came off a good running engine. - 70

GOPR0024_zps22612b96.jpg


GOPR0023_zpsa14631f4.jpg


Random boxes of stuff

GOPR0021_zps7cca94c5.jpg


headers for 318/240/360, el cheapo ones and rusty but are still usable - 50 for two pairs!

GOPR0014_zpsf07cd2a9.jpg


GOPR0013_zpsb290fbc9.jpg


GOPR0012_zps4679980d.jpg


727 core. - 150

GOPR0011_zpsd0b041da.jpg


GOPR0010_zps7cdfa933.jpg


Fender, has some rot - 50

GOPR0005_zps44d762a2.jpg


GOPR0006_zps04a9559f.jpg
 
how about the torsion bar crossmember, if theres no rot I'm interested
 
I don't want to cut the body up at all, if I cant' sell it as a whole I'm keeping it. Sorry.

Edit:
Maybe I should explain myself haha
It's a project car that's been torn apart for restoration and I'm parting out all the misc. stuff I've acquired. Body is for sale too but as a whole with fenders, hood, doors, glass, k frame and a few other parts. No engine, maybe the trans.
 
nice deal! i'd be more carefull with all that trim in the trunk.. jm2c. good solid project!
 
Status
Not open for further replies.
-
Back
Top