[SOLD] 1970 dodge dart drag car

-
Status
Not open for further replies.

440outlawdart

Well-Known Member
Joined
Apr 1, 2011
Messages
1,220
Reaction score
474
Location
west county,mo.
Rating - 100%
1   0   0
Contact seller
sold as roller.1970 dodge dart,all fiberglass except roof and quarters.removeable doors.removable front end.has parachute mount on rear and cable.comes with powerglide.with one transbrake cover and one foot brake covertor 5500 stall,hipster trans brake.recent last year nhra 850 cert.arm front end,4 link rear,ford 9 inch with strange aluminum carrier .486 richmond pro gear..40 spline mw axles,5/8 studs,coil overs at all 4 corners,disc brakes all 4 corners,aluminum drive shafthurst quarter stick,electric shift.delay box.msd 7al box,msd cil,aluminum radiator with fan,trans coller,set up fpor 2 batterys but no batterys.holley pro max full pump.alston switch panel.all aluminum interior.sqare tube chassis.paint is ok from a distance.no vin,no title.bill of sale onlycar was built at chassis technolgy in ohio in 2000.which is no longer around.phenix f/s 14.5x32-15 slicks.near rear weld wheels.comes with headers set up for big block with front engine plate and
mid plate,has a rear wing.funny car cage.was raced at mo-kan in 2022.11.500.00.obo.pm me here

296113380_5684206584923879_5830433549289138344_n.jpg


311042367_5886431728034696_74267336794955303_n.jpg


321999409_1509052616247020_1818320767006191181_n.jpg


321565346_819858882440336_1776321591659177271_n.jpg
 
Last edited:
i curretly have a 400/512 in it i bought locallly new build and cant get to run correctly.car has becoome a money pit and must go i will pull the motor to sell as a roller.will sell engine with car for more money.spec on engine....Engine Details: - 400 Cold Weather 230 Block (.030 overbore) - This is strongest Mopar production block, very hard to come by as they only made them in the summer of 1971. - Molnar Forged Crank and Rods - Ross Pistons (10.5 to 1 Compression for pump gas) - TRICK FLOW 270 HEADS!! (very hard to find right now) flow 353 cfm on the intake at .700 inch lift. - Comp Solid Roller Cam and lifters( see picture for specs) - Smith Push Rods - Harland Sharp Roller Rocker Arm (1.5 ratio) - Indy Max Wedge Port Intake (4500 flange) - ATI Harmonic Balancer - 1020 Holley Dominiator Carb Built by Dominic at Thumper Carbs (Dominic is know for building Dominator's that run well on the street and strip) - BLP Racing Fuel Log - MSD Billet Distributor - Taylor 9MM Fire Power Spark Plug

341918564_6565295870187502_2880771962167508873_n.jpg
 
Status
Not open for further replies.
-
Back
Top