kb67mopar
Well-Known Member
I've got a 70's 360 in the garage that has been apart for a while. Got it on trade recently and don't know a ton about it. It's slathered in grease and not all rusted up. Crank looks good and usable and so do the cylinder walls. Everything looks like it could be hot tanked and likely re-assembled with new gaskets and bearings.
Comes with:
Block
Crank
Heads - open chamber, with rocker shafts and rockers and a set of magnum heads i have too from a 90's 360.
Cast 4BBl Intake
2 oil pans
Timing Cover
and a bunch of magnum engine parts too
All of this is located near Green Bay, Wisconsin
I have been hoping to trade this all for a good G3 hemi buildable core. I would sell outright, feel free to make an offer, or ask about a single part...would like to sell whole if possible.
360 by itself with original heads and all original parts (minus timing set, cam which are gone) - $350 obo
whole package with magnum heads, extra oil pan, magnum timing cover/brackets - $450
Just magnum parts by themselves - $150
Comes with:
Block
Crank
Heads - open chamber, with rocker shafts and rockers and a set of magnum heads i have too from a 90's 360.
Cast 4BBl Intake
2 oil pans
Timing Cover
and a bunch of magnum engine parts too
All of this is located near Green Bay, Wisconsin
I have been hoping to trade this all for a good G3 hemi buildable core. I would sell outright, feel free to make an offer, or ask about a single part...would like to sell whole if possible.
360 by itself with original heads and all original parts (minus timing set, cam which are gone) - $350 obo
whole package with magnum heads, extra oil pan, magnum timing cover/brackets - $450
Just magnum parts by themselves - $150
Last edited:
