[SOLD] 1971 Demon Duster bucket seats

-
Status
Not open for further replies.

72dart

Mopa
Joined
Nov 22, 2004
Messages
513
Reaction score
68
Location
PTC
Rating - 100%
2   0   0
Contact seller
This is a nice set of buckets taken out of my Demon that was restored 5 yrs ago and driven very little. The passenger side seat that is pictured has rust damage on the support area. The metal seems to have been treated to stop the rust damage and is strong enough to support the seat and passenger. I was surprised when I found this while switching to some seats that I had purchased years ago. The drivers seat is much better with very little rust damage. I will post a picture of the drivers seat in another post because it would not fit in this one. As you can see the seats were restored with new foam. I am asking $600 plus shipping and are located in Peachtree City, Georgia.
 

Attachments

  • IMG_0367.jpg
    104.9 KB · Views: 765
  • IMG_0368.jpg
    85.3 KB · Views: 728
  • IMG_0369.jpg
    82.6 KB · Views: 688
  • IMG_0371.jpg
    108.2 KB · Views: 759
  • IMG_0372.jpg
    140.5 KB · Views: 704
  • IMG_0373.jpg
    150.2 KB · Views: 706
  • IMG_0370.jpg
    48.4 KB · Views: 719
Pictures of drivers seat.
 

Attachments

  • IMG_0367.jpg
    124.1 KB · Views: 733
  • IMG_0368.jpg
    89.5 KB · Views: 692
  • IMG_0374.jpg
    155.3 KB · Views: 687
  • IMG_0375.jpg
    90.1 KB · Views: 692
I have a set of late 70 early 71 tracks that have the wire that connects the two mechanisms. These tracks came with the replacement seats I had purchased many years ago. I kept and used the ones on the seats I am selling because they are the late 71 type that does not use a wire to operate mechanism on both tracks. They are in good shape with surface rust and I was thinking of restoring them cosmetically but will probably sell as they are. If you are interested in the tracks I will post some pictures and would Ask $150.
 
I would like some pics of the tracks. I would also like to be first in line on the tracks if they look good in the pictures.
 
I would rather offer them first to anyone who might be interested in the seats. But you will be first in line for the tracks if the buyer of the seats do not want the tracks. I will post pictures of the tracks for everyone to see.
 
Pictures of tracks that buyer of seats will have first chance to buy.
 

Attachments

  • IMG_0376.jpg
    65.6 KB · Views: 644
  • IMG_0377.jpg
    61.2 KB · Views: 657
  • IMG_0378.jpg
    53.5 KB · Views: 622
  • IMG_0379.jpg
    79.7 KB · Views: 645
  • IMG_0380.jpg
    74.4 KB · Views: 625
Honestly I would be scared to have a passenger sitting in that sit incase of an accident. The end result could be scary....
 
Will go down on price for both seats and tracks. Bottom price for both together is $650 plus shipping.
 
I don't think he's gonna part with the seat tracks. That seems to be all that anyone is really interested in anyways. I would have a hard time paying that kinda money for the seats though. They look nice, don't get me wrong, but they would need to come completely apart to weld in some new metal. there's no way I would trust those seats under hard acceleration or a crash. The best I would do is $350 for everything. special care needs to be taken when removing the hog rings as to not tear the material.

Wish someone took the time to do it right before they refoamed and covered them.
 
Status
Not open for further replies.
-
Back
Top