Plik
Ragin Cajun
Well Mopar fam, it's been a while. I've decided to put my big block duster project up for sale. It's been sitting in my garage for almost 10 years untouched and I'm too busy raising a family now to work on it.
Original tear down/build thread is here: Plik's '72 Big Block Duster Build
For sale: 1972 Duster, currently 98% disassembled and on rollers for metal work. All parts listed go with the car. This is a package deal, I will not part out, so please don't ask. Car no longer has original /6 drivetrain. Rear end, wheels and fiberglass hood have long been sold. I've welded in frame connectors, patches in the front floor boards and a new trunk pan. Included are patch panels for the lower quarters, tail section, and trunk extensions. Interior parts are in good shape. Front seats need reupholstering, needs carpet and a headliner. All hardware and small parts were bagged and labeled when disassembled.
Also included:
- Built 383 long block with Edelbrock RPM heads, forged aluminum pistons, polished stock forged rods, stock forged crank, ARP bolts, comp cam, roller rockers. Engine has never been fired, but well oiled and sealed.
- A833 close ratio 4 speed
- Torqueflite 727
- B body 8.75" housing and 489 carrier
- 69 valiant grill
- clutch/brake pedal assembly
- manual steering box
- extra set of tail lights
- extra rear bumper
- shifter hump
I took a few recent pics of what I could here ->
Asking $5000 for everything. Located in Houston, TX (77095)
Original tear down/build thread is here: Plik's '72 Big Block Duster Build
For sale: 1972 Duster, currently 98% disassembled and on rollers for metal work. All parts listed go with the car. This is a package deal, I will not part out, so please don't ask. Car no longer has original /6 drivetrain. Rear end, wheels and fiberglass hood have long been sold. I've welded in frame connectors, patches in the front floor boards and a new trunk pan. Included are patch panels for the lower quarters, tail section, and trunk extensions. Interior parts are in good shape. Front seats need reupholstering, needs carpet and a headliner. All hardware and small parts were bagged and labeled when disassembled.
Also included:
- Built 383 long block with Edelbrock RPM heads, forged aluminum pistons, polished stock forged rods, stock forged crank, ARP bolts, comp cam, roller rockers. Engine has never been fired, but well oiled and sealed.
- A833 close ratio 4 speed
- Torqueflite 727
- B body 8.75" housing and 489 carrier
- 69 valiant grill
- clutch/brake pedal assembly
- manual steering box
- extra set of tail lights
- extra rear bumper
- shifter hump
I took a few recent pics of what I could here ->
Asking $5000 for everything. Located in Houston, TX (77095)
Last edited:
