1972 Dodge Dart Swinger 318

-
Status
Not open for further replies.

swest

Well-Known Member
Joined
Jul 28, 2010
Messages
82
Reaction score
0
Location
Ottawa
Rating - 0%
0   0   0
Contact seller
Well here it is, almost made it to the restoration forum but with 1 teenager, 1 pre teen and a 2 year old baby its getting extreamly hard to get more then 2 hours straight in garage. So i decided to sell my Dart and fund a fully finished car for myself since i have no time anymore.

Car was shipped from the south US in 2008 the PO had it painted F8 green but original color is F3.

Car was a daily driver until fall 2010 when i decided to start the project.

Start off with the need to know, it has been stripped down to be painted and the usuall fixes such has bottom corner windows and small front passenger window channel corner.

I started the mini tub but did not finish putting back the tubs. see pics. The inboard leafs have been done and are all 2k primed.

Car is original High Level 7 1/4 318 904 auto, factory air, power brakes and front disc, power steering.
90 000miles original motor with stock steelies and dog dish. All numbers maching.

Also started refilling the roof seam with new filler but couldnt finish so sprayed it with some lacquer until i could.

Under carriage is 100 percent rust free.

Was a previous vinyl top (green) but was taken off by previous owner, i have all the trim as well for it as it was left on the car. Car is 100 percent complete.

I can get the 7 1/4 back on as well to roll around.

Perfect build sheet found under seat.

I live in Ottawa Ontario Canada

Also available, 8 3/4 brand new, brand new ends, brand new brakes assemblies brand new drums 10x2 and 5x4.5 big bolt pattern axles complete drum to drum and shortened a perfect 2.25inchs by a professional both sides for 5.5 inch backinspace 15x10. I can include teh 8 3/4 for and extra 1000$ It was made for the car comes with a 3:23 suregrip in perfect shape.

Looking for 3400$ with 7 1/4 or 4400$ with the brand new 8 3/4.



Here are some pics, cheers. Steven
 

Attachments

  • DSCF1084.JPG
    123.7 KB · Views: 919
  • DSCF1093.JPG
    136.2 KB · Views: 898
  • DSCF1092.JPG
    122.4 KB · Views: 898
  • DSCF1091.JPG
    120.2 KB · Views: 914
  • DSCF1090.JPG
    122.8 KB · Views: 918
  • DSCF1089.JPG
    127.1 KB · Views: 908
  • DSCF1088.JPG
    131.7 KB · Views: 923
  • DSCF1087.JPG
    129.3 KB · Views: 918
  • DSCF1086.JPG
    131.8 KB · Views: 916
  • DSCF1085.JPG
    146.1 KB · Views: 920
More pics, also have the build sheet and it has the original fender tag.
 

Attachments

  • DSCF1104.JPG
    123.7 KB · Views: 863
  • DSCF1103.JPG
    124.1 KB · Views: 876
  • DSCF1102.JPG
    142.8 KB · Views: 875
  • DSCF1100.JPG
    114.8 KB · Views: 892
  • DSCF1099.JPG
    145.1 KB · Views: 869
  • DSCF1098.JPG
    112.6 KB · Views: 853
  • DSCF1097.JPG
    143.3 KB · Views: 886
  • DSCF1096.JPG
    132.2 KB · Views: 895
  • DSCF1095.JPG
    130.1 KB · Views: 890
  • DSCF1094.JPG
    141.8 KB · Views: 896
more pics
 

Attachments

  • DSCF1112.JPG
    127.7 KB · Views: 818
  • DSCF1115.JPG
    128.7 KB · Views: 836
  • DSCF1117.JPG
    145.2 KB · Views: 837
  • DSCF1118.JPG
    109 KB · Views: 829
  • DSCF1111.JPG
    126.7 KB · Views: 838
  • DSCF1110.JPG
    131 KB · Views: 853
  • DSCF1108.JPG
    124.6 KB · Views: 870
  • DSCF1107.JPG
    124 KB · Views: 874
  • DSCF1106.JPG
    113.3 KB · Views: 877
  • DSCF1105.jpg
    73.1 KB · Views: 858
Tubs cut out ready to be mini tubbed. I even have the sheet metal for you. Inboard already done. Ready for some 325x50x15.
 

Attachments

  • DSCF1130.JPG
    141.7 KB · Views: 781
  • DSCF1131.JPG
    147.5 KB · Views: 797
  • DSCF1133.jpg
    82.1 KB · Views: 813
  • DSCF1137.JPG
    119.9 KB · Views: 798
  • DSCF1129.jpg
    81.1 KB · Views: 810
  • DSCF1123.jpg
    78 KB · Views: 794
  • DSCF1126.JPG
    122.5 KB · Views: 808
  • DSCF1122.jpg
    74 KB · Views: 825
  • DSCF1121.JPG
    126 KB · Views: 824
  • DSCF1120.JPG
    121 KB · Views: 815
more
 

Attachments

  • DSCF1150.JPG
    113.6 KB · Views: 796
  • DSCF1145.JPG
    138.5 KB · Views: 805
  • DSCF1147.JPG
    140 KB · Views: 785
  • DSCF1146.JPG
    115.3 KB · Views: 794
  • DSCF1141.JPG
    92 KB · Views: 783
  • DSCF1140.JPG
    113.2 KB · Views: 797
  • DSCF1139.JPG
    111.2 KB · Views: 799
Last day on the road before i started to restore her. With some pictures of the new brakes on the 7 1.4
 

Attachments

  • IMG_2269 (Medium).jpg
    116.6 KB · Views: 770
  • IMG_2268 (Medium).jpg
    109.3 KB · Views: 768
  • IMG_2266 (Medium).jpg
    89.7 KB · Views: 771
  • IMG_2254 (Medium).jpg
    97.1 KB · Views: 761
  • IMG_2255 (Medium).jpg
    95.4 KB · Views: 751
  • DSCF1146.JPG
    115.3 KB · Views: 753
  • IMG_0191.jpg
    84.2 KB · Views: 751
  • IMG_0188.jpg
    100.7 KB · Views: 758
  • DSCF0494sale.jpg
    115.5 KB · Views: 788
  • DSCF0491.jpg
    123.2 KB · Views: 801
wow that was alot of work!
 

Attachments

  • IMG_2270 (Medium).jpg
    107.4 KB · Views: 752
  • IMG_2267 (Medium).jpg
    98.7 KB · Views: 775
No 1/4's have been cut off the car, maybe i dont understad the question though both inner tubs are cut to do the mini tub. Yes very hard to find up here why I bought this one but no time.

No the 8 3/4 is brand new,brand new ends, brand new brakes assemblies and 5x4.5 axles complete drum to drum and shortened a perfect 2.25ichs both sides for 5.5 inch backinspace 15x10.I am going to sell that one seperatly. for and extra 1000$ i will include it as it has been fitted to the car. comes with a 3:23 suregrip cone in great shape.
 
Hi Steve, sorry about the 1/4's, to me it looks like in your 1st post, pics 7 and 8 that the 1/4's have been taken off?? Hmmm I havent done my taxes yet.....
 
No problem, the quarters are in great shape, only thing cut was the tubs in a fashion that is very easy to weld in stock looking mini tub, like on bigblockdart tech pages. Taxes hey!! lol its always shopping time around tax season, let me know and your not to far at all.
 
I including the 8 3/4 for an extra 1000$ (4400$) only if car is purchased. I will not sell at 1000$ alone. cheers! Perfect fit to the inboard leaf mod.
 

Attachments

  • IMG_0234.jpg
    92.7 KB · Views: 707
  • IMG_0235.jpg
    80.7 KB · Views: 711
  • IMG_0236.jpg
    75 KB · Views: 691
  • IMG_0237.jpg
    78.7 KB · Views: 703
  • IMG_0238.jpg
    82.7 KB · Views: 701
  • IMG_0240.jpg
    94 KB · Views: 700
wish i had the exstra money right know i would buy your car and i only live 45min from ottwa can spend the exstra money till my taxes are done .
 
Sold, thanks everyone. Sorry if i have not contacted everyone back, the first person that emailed me bought it.

Thanks Fabo!
 
I think it did, I put it all back together this weekend and got it running and fully drivable for him. He is a body man, not that it needs any work but definatly a good home. We are going to have another hot mopar on the streets in Canada for sure.
 
Sorry you had to let such a nice car go but gone to a good home got to make you feel a little better.
 
Im sorry as well but the extra little child (Number 3) takes all my time... So im in the hunt for a fully rebuilt one now so I dont spend days in the garage :). I have a few in my area, but im not in a rush.
 
Status
Not open for further replies.
-
Back
Top