[SOLD] 1973 Charger SE project

-
Status
Not open for further replies.

j-miller

Demonized by Dodge
FABO Gold Member
Joined
Feb 13, 2008
Messages
3,541
Reaction score
366
Location
Conestoga,PA
Rating - 100%
25   0   0
Contact seller
Selling my project '73 Charger SE I had for 10 years and needs a new home where it should be restored. It's originally a 400 big block,4 speed car and only 271 were made with these options according to Galen's white books....so it's pretty rare. It is a pretty well complete but have everything disassembled right now. When I got the car, the original motor and transmission were gone and I have now a 400 out of a '72 Charger that will go with the car, but no transmission yet. It has an 8-3/4 rear, don't know the gear ratio or if it's a sure grip. The car does have rust issues in the lower rear quarters, lower front fenders, needs a complete floor for sure. I haven't had a good look at the frame rails, but look good from what I can see without jacking the car up. I had done some resto work on the interior panels and that's about it. I did buy a bunch of new parts for the car. I have the fender tag, a detoriated build sheet and parts of it is still stuck on the drivers side floor. Car has no title and will come with a bill of sale. I have plenty of pictures I will post of the car. This car should be restored to original and I have no time and need the money to go towards other things. Would like to get $4,000 for everything. PM me for any info.
 

Attachments

  • IMG_0974.jpg
    38.9 KB · Views: 412
  • IMG_0979.jpg
    30.5 KB · Views: 406
  • IMG_0981.jpg
    36.7 KB · Views: 403
  • IMG_0980.jpg
    29.5 KB · Views: 406
  • IMG_0978.jpg
    27.9 KB · Views: 410
  • IMG_0975.jpg
    53.2 KB · Views: 418
  • IMG_0977.jpg
    44.7 KB · Views: 403
  • IMG_0976.jpg
    41.4 KB · Views: 401
  • IMG_0973.jpg
    40.3 KB · Views: 394
Trunk area and 400Big block. Trunk floor seems good, trunk lid rust hole on bottom lip.
 

Attachments

  • IMG_0947.jpg
    55.5 KB · Views: 409
  • IMG_0948.jpg
    56.1 KB · Views: 401
  • IMG_0951.jpg
    56.6 KB · Views: 400
  • IMG_0963.jpg
    43.5 KB · Views: 397
  • IMG_0964.jpg
    40 KB · Views: 410
  • IMG_0966.jpg
    42.5 KB · Views: 408
  • IMG_0968.jpg
    46.1 KB · Views: 407
  • IMG_0960.jpg
    43.4 KB · Views: 390
  • IMG_0961.jpg
    43.2 KB · Views: 417
  • IMG_0962.jpg
    47.3 KB · Views: 408
Rear of the car, interior floor, fender tag, partial stuck to the floor build sheet,and misc.
 

Attachments

  • IMG_0988.jpg
    49.3 KB · Views: 376
  • IMG_0989.jpg
    43.5 KB · Views: 377
  • IMG_0990.jpg
    41.8 KB · Views: 383
  • IMG_0593.jpg
    42.7 KB · Views: 388
  • IMG_0987.jpg
    44.8 KB · Views: 395
  • IMG_0986.jpg
    42.6 KB · Views: 380
  • IMG_0985.jpg
    40.6 KB · Views: 397
  • IMG_0984.jpg
    42.5 KB · Views: 388
  • IMG_0983.jpg
    36.6 KB · Views: 402
  • IMG_0982.jpg
    36.5 KB · Views: 385
The hood I was planning on using. Extra rusty trunk lid.
 

Attachments

  • IMG_0998.jpg
    87.7 KB · Views: 386
  • IMG_0997.jpg
    27 KB · Views: 356
  • IMG_0995.jpg
    52.9 KB · Views: 383
  • IMG_0994.jpg
    28.1 KB · Views: 384
  • IMG_0993.jpg
    34.7 KB · Views: 373
  • IMG_0992.jpg
    44.1 KB · Views: 364
  • IMG_0991.jpg
    34 KB · Views: 387
Interior and misc items.
 

Attachments

  • IMG_1012.jpg
    39.9 KB · Views: 373
  • IMG_1019.jpg
    58 KB · Views: 387
  • IMG_1011.jpg
    25.6 KB · Views: 348
  • IMG_1010.jpg
    35.5 KB · Views: 374
  • IMG_1009.jpg
    37.4 KB · Views: 373
  • IMG_1003.jpg
    54.4 KB · Views: 363
  • IMG_1002.jpg
    73.6 KB · Views: 399
  • IMG_1001.jpg
    48.9 KB · Views: 382
  • IMG_1000.jpg
    43.5 KB · Views: 374
  • IMG_0999.jpg
    44.7 KB · Views: 372
More stuff.
 

Attachments

  • IMG_1022.jpg
    63.5 KB · Views: 361
  • IMG_1023.jpg
    62.7 KB · Views: 363
  • IMG_1024.jpg
    70 KB · Views: 357
  • IMG_1026.jpg
    81.7 KB · Views: 343
  • IMG_1021.jpg
    62 KB · Views: 368
  • IMG_1018.jpg
    59 KB · Views: 360
  • IMG_1017.jpg
    63.7 KB · Views: 367
  • IMG_1016.jpg
    63.6 KB · Views: 367
  • IMG_1014.jpg
    52.1 KB · Views: 371
  • IMG_1013.jpg
    34.6 KB · Views: 352
Center console is set up for an automatic and never got the 4 speed top plate to install.
 

Attachments

  • IMG_1033.jpg
    52 KB · Views: 352
  • IMG_1034.jpg
    54.6 KB · Views: 354
  • IMG_1035.jpg
    74.1 KB · Views: 343
  • IMG_1036.jpg
    74.3 KB · Views: 351
  • IMG_1032.jpg
    74.5 KB · Views: 352
  • IMG_1031.jpg
    83.1 KB · Views: 358
  • IMG_1030.jpg
    78.6 KB · Views: 349
  • IMG_1029.jpg
    65.2 KB · Views: 352
  • IMG_1028.jpg
    64.7 KB · Views: 355
  • IMG_1027.jpg
    73.8 KB · Views: 366
I have the original upper door panels(not shown) and picked up a nice set including the rears. The rear interior panels have a window crank hole for the quarter windows which rool down, SE cars don't have the roll down windows.
 

Attachments

  • IMG_1041.jpg
    55.4 KB · Views: 342
  • IMG_1040.jpg
    61.3 KB · Views: 341
  • IMG_1039.jpg
    58.8 KB · Views: 348
  • IMG_1038.jpg
    59.5 KB · Views: 350
  • IMG_1037.jpg
    65 KB · Views: 334
This is the stuck to the floor partial build sheet.
 

Attachments

  • IMG_0959.jpg
    51.3 KB · Views: 323
Status
Not open for further replies.
-
Back
Top